Gonna have to ditch the Soundsmith Carmen II


I've given this cart the benefit of the doubt and then some, but it's going to have to go. 

the sibilance on s's is just to much. The sound isn't distorted, just way louder than the rest of the vocals. This happens to one degree or the other on all records with vocals. Sometimes it's barely noticeable sometimes it hard to bare. other than the sibilance I love the sound, I love the live nature of the music.  so I hate getting rid of it. 

So so the things I've done and made sure are dead on:

alighnment - that means SRA, VTA, TF, Azimuth, anti skate (per,SS), platter level, checked mounting hardware, checked tunntable . . .etc

my Denon 2x20L doesn't do this.

it may be there is a bad combo with some piece of equipment or loudspeaker and it just doesn't jive with the rest of the rig. 

My system:

VPI prime
Parasound JC3+ Phono pre
PAD phono cables
Decware integrated SET tube amp
Zu Omen Def MKII with Radian tweeter upgrade. 

So the question is what cart, around $1k will give that live dynamic sound, tracks well, but does emphasize the S's?

ones I'im interested in but have no way of hearing:

Ortofon Quintet Black
Audio Technica ART 9
???


last_lemming
Hello Peter,

I did call you about a week or two after I purchased it. That was about 4-6 months ago. I don’t listen every day, usually on weekends so it’s taken me a while to go through all my the different variables.  You did indeed try to help and I went through all the different suggestions. I thank you for that. I honestly don’t think it’s the cart, but as someone said earlier it may not be working in good synergy with the system.  And my room certainly isn’t helping due to its small size.  It’s not sibilance with distortion, but the S’s seem more pronounced than they should be. 

I did did call VPI and talked with them as well, and I even bought a new pivot and cup to make sure that wasn’t the issue as there were some minor small scatches
that looked suspicious. As far as the alignment is concerned I’ve got the table zero’d in using the SMARTractor, Fogometer and a digital scale and I have followed all the best practices as described by people on the know such as yourself. 

The thing is I love the presentation of the music through the cart!
Consider the torque on the mounting screws. Sounds like hokum, but IME it can have a significant effect. I use a German torque screwdriver.

I have a Carmen mkII and do not experience any real  sibilance (yes on a occasional record) but it seems to be the press more than the cartridge as it happens very very infrequently. VTA is the first thing I think of but that has been mentioned here so ummm bad tip?
One other obvious explanation that could give rise to sibilance is build up of dirt on the stylus. Have you examined it under a loupe or scope and do you have a regular cleaning program in place? Sure you’ve addressed this but for others with similar problems it can definitely be a source of issues. I find my stylus needs cleaning after each side or two, and this is with ultrasonicly cleaned discs
I clean before each side is played and check the condition of the cantilever and diamond often.