Fuses on Magnepan .7 speackers

I have heard a difference between fuses, mostly for the better.
But, I do think prices have gone a bit too high. 
Also, some of these designs are not UL spec'd. So, I would be concerned that they would trip when required to- and save the equipment they were supposed to protect.
I second the recommendation for HiFi Tuning fuses.
B

Thank you all for your feedback.  Looks there are defenitly two sides of the fence on this one.  Im going to call my sales guy Mark at Audio Perfection in Richfield MN and se what he recommends.  I have always gotten great honest advice from him.

My experience most Audio Stores don’t push tweaks too much or have a lot of experience with them, so good luck there. I’ve also found many manufacturers haven’t tried them or feel they didn’t make a difference but I found on my gear they did; I think they just want to stay out of the debate.

I’m from the camp fuses do make an improvement and run SR Blacks. Bought mine from VH Audio with the free trial period so no risk.

Being a former Magnepan owner and having blown a few fuses myself on them it could be a costly thing if you blow them here and there. I’d suggest if you try them to bump them up a bit but be careful. Are the stock fuses Fast Blow, if so maybe Slow Blow would be the way to go. I don’t recall what the stock ones are.

@grekon39- ".....there are definitely two sides of the fence on this one." One could certainly say that! If you haven’t perused the offerings/opinions, in the following threads, you might be interested. Don’t know how many responses are based on speaker fuses, though I noticed a couple, in the second thread. https://forum.audiogon.com/discussions/the-new-synergistic-research-blue-fuses and(back a tiny bit farther): https://forum.audiogon.com/discussions/synergistic-red-fuse

I have had both MMGs and MG12s (now called .7).
I reconnected them to by-pass the fuse.
The difference in transparency and clarity is obvious.
If you trust your amp and run it well below its capabilities, just by-pass.
I have had MMGs driven by a qsc pro-amp at absurd SPLs for 15-20 minutes at a time and never had a problem.