I have used a few ways to do this.
A good tape applied works well. Apply tape then scratch it down with your finger nail. Slightly hold down on the tape so that it won’t pull up, then pull at an angle, do not pull up and simply rip the tape off.
I have used a sticky putty. press lightly, the cone sticks and pulls right up.
The vaccum has not worked well for me.
In extreme circumstances, I have had to lift the dustcap and re glue it... Apply acetone around the glue of the cap, take a straight edge blade and slowly cut away allowing the acetone to eat the glue. Once It is up, clean up the glue area, straighten your cap and re glue it down.
A good tape applied works well. Apply tape then scratch it down with your finger nail. Slightly hold down on the tape so that it won’t pull up, then pull at an angle, do not pull up and simply rip the tape off.
I have used a sticky putty. press lightly, the cone sticks and pulls right up.
The vaccum has not worked well for me.
In extreme circumstances, I have had to lift the dustcap and re glue it... Apply acetone around the glue of the cap, take a straight edge blade and slowly cut away allowing the acetone to eat the glue. Once It is up, clean up the glue area, straighten your cap and re glue it down.