Why not horns?

"As you you've established clearly that you have no use for horns, pray tell, what use have we of you? Why are you presenting yourself so emphatically in an arena where you have no interest nor expertise?" - Macrojack

See, now this seems smug to me. But it's probably just a case of lost in translation.
My original foray into this thread was the simple answer to the question "Why not horns?" To which my response was the equally simple, because they SOUND like horns. It was not my intention to go beyond that yet somehow I got drawn in.
And since I joined this thread it turns out that the only "horn" that didnt sound like a horn wasn't even a horn over a significant area of its frequency range.

I AM curious. AND I do have experience with horns. I am NOT resistant to horn theory. But so far my only assertion against is that horns sound like horns. And so far the only place I've presented myself so emphatically was either
a) about amplifier power, etc.
b) the fact that multiple drivers can approach the same sensitivity as a single large horn. Properly implemented, this is true. As I've tried to convey with a real world example.
c) that at least one of the examples of a "horn with a smooth sound" wasn't even a full horn after all.

So, really, you probably have no USE of me. Even so. How does that restrict my presence? And, most importantly, how does educating myself on horn theory change any of the above three?
For the record, I will most likely still go and read what you have suggested because I am infinitely curious. My only problem was with the idea that we seemingly had to stop all interaction in this thread until I went to read your suggested material.
Again, perhaps intentions were lost in translation.

Horns are great-My current speaker set up is Klipsch Lascalas, cabinets modified to reduce box resonance and coloration, as are the horns as well modified to reduce the same. I also added 50 lbs to each box by building bases for additional mass and to raise them to a better listening height. I use a pair of powered subs from 50 hz on down. I have owned many speakers in my time, and have felt that each system/room had great characterists, with some flaws. I have also listened to many systems beyond that. I listen at 100 db often, and peaks go beyond that. I have found a system that brings me closer to the musical event at my respected price range, and I do not look back. I choose to not use tubes(unlike many tube users), because I have found neutral ss gear I can listen to for hours on end. My system has great rhythm, beat and tempo, which to me is most important in creating the reality thing. Spatial imaging is excellent with the speakers disappearing much of the time. Dynamic range is awesome. This is the difference between the soft and loud passages of music, relative to the systems noise floor, which is QUIET. As the recording gets better, so does the system. Listening to Patricia Barber and recordings of this nature are 2nd to none. A recording such as Jethro Tull's Aqualung is not as dynamic or wide range, but I hear the bands coherence in playing together, which is what I listen for before anything else. My system does this wonderfully, as well as all those other "audiophile " things. I believe everyone should get a listen to a properly designed horn system and a room that can handle them. Thank you for reading my rant.....Dan

Herman. I have one last thing to mention with regards to parallel amps in an effort to reconcile why we keep misunderstanding what each other is saying.....
If you take a look at BATs website and look at the following products: VK-255SE and VK-600. Scroll down to the bottom of each page and look at the specs. You will see that both amplifiers have 26dB of gain. Yet one is rated at 150W into 8ohms and the other is 300W into 8ohms.
The practical difference between these two amps is that the VK-600 is basically a chasis with two of the smaller amps fit inside. There are other differences but practically speaking, this is the crux of it. The 600 basically has double the output devices in parallel that the 255 has. Indeed, they previously offered a VK-250M which was basically the same as a VK-600 in two seperate boxes. Now, they go a step further. Just like the VK-75 and the VK-150, if you take the VK-600 and parallel its inputs/outputs you get an amp with the same gain but twice the current capability again.

Bottom line. I totally agree that paralleling identical amps does NOT change the gain (dBW) one bit. But clearly, BAT is a good example of how it does double the output power.
Perhaps we've been arguing over two very different things here. Whatever the case, if you still strongly disagree with what BATs website clearly states then, well, I have to admit I am curious to know why but this is probably not the best place to hash that out.
Cheers.

MrD,

Can you tell us more about the mods to the La Scala, how you determined them, and how these effected the resulting sound? Thanks.

Prez,

You said the power doubled. Since paralleling does not increase power as I demonstrated it was logical to assume you meant bridging since that is the only way to get more power. You scold me for not properly interpreting your mistaken idea that power went from 75 to 150 watts????

You've already proven you have no idea how amps operate with your assertion that the current doubles when you provide the same voltage to the same load. I do mean power, not gain. I completely understand the difference. Evidently you do not because paralleling amps does not affect the gain, it remains the same.

A distortion is an error and they do add up, they don't average. Two drivers distorting differently is more distortion than either driver by itself.

I've debated people like you in the past and will not do so again. You are now so hell bent on not admitting your mistakes you are embarrassing yourself with idiotic assertions.

Good day.

.