Recommended solid state amp for user with tinnitus


Hello all,

I'm 58 and been a music lover since my teens. Through a variety of jobs in noisy work environments (metal working), target shooting, loud rock in my teens, etc., etc., I have been a sufferer of tinnitus for many years.

I am finding the 20-year old Martin-Logan Stylos speakers in my home theater are aggravating the tinnitus. I am replacing them as the front left-right mains in my home theater with the new Monitor Audio Gold 300's (gen 5 2019), along with a PS Audio DirectStream DAC. My  Marantz AV7702mkII home theater processor will be the preamp for 2-channel playback. The speakers use a MPD (Micro Pleated Diaphram) high-frequency transducer for the tweeter,  90 dB Sensitivity (1W@1m) • 4 Ohms Nominal Impedance • 3.5 Ohms @1 kHz Minimum Impedance, 250 Watts Power Handling (RMS) • 100 - 250 Watts Recommended Amplifier Requirements (RMS).

I was looking for a solid state amp in the $2000 - $5000 range that would work well with the Gold 300 speakers and keep the sound warm and non-fatiguing with good resolution. Any suggestions are welcome and appreciated. I'm wondering if McIntosh might be suited for my situation(?). Any suggestions for solid state are welcome.

In my office, I have a PrimaLuna HP tube amp, PS Audio DirectStream DAC and Monitor Audio PL100 monitors, and they tend to be much easier on my ears and tinnitus issue. I do NOT want a tube amp for my system that I am asking for recommendations on, no way to place it in my cabinetry.

Thank you in advance,
Sam
128x128samster777
The Usher R1.5 is class A the first 50w then 150w into 8ohm a/b
it is said to be very tube sounding, maybe worth a try!
Tinnitus can be very frustrating, especially for audiophiles.  I suffer from pulsatory tinnitus hearing loud swooshes of blood flow in my left ear with every heartbeat.  I can turn it down by adjusting my head and neck position. Crazy and maddening.  An MRI ruled out any major health concerns.  I have learned to live with it and when it comes to music I turn up the volume. 
Hi Samster, I'm a family doc and frankly, the only thing medicine has been able to do with tinnitus is make it worse. The technique I use the most is masking. Running a fan in the bedroom at night is an example. The constant droning will drown out the tinnitus for some people. Tinnitus will occur at different frequencies and may or may not be associated with hearing loss. The problem for many tinnitus sufferers is that their threshold of pain is lowered. Under no circumstance do you want to go louder than 95dB. I suggest you get a dB meter. I prefer analog displays not digital. 
I would think that the speakers and room acoustics would make a much bigger difference in regard to your ringing than the amplifier. You want to be able to tolerate a volume loud enough to mask the tinnitus but not so loud as to further damage your hearing. Certain frequencies will mask the ringing others will make it worse. If you can borrow a scientific tone generator you can exactly profile your own tinnitus then you could use a digital equalizer to cut back the frequencies that bother and advance those that mask. 
Having said all that I think the Benchmark AHB2 would be a great amp for you. If one is not enough power then you can add a second down the line. Good Luck,

Mike
Flatblackround, I hope what you had was an MRA of your neck and brain. Magnetic Resonance Arteriogram. Usually the cause of your problem is plaque in an artery plus or minus a conductive hearing loss. Sound is not getting from the eardrum to the inner ear normally but the inner ear itself is fine. Rarely do you find a congenital kink in an artery disrupting the blood flow causing the bruit. Usually this bothers people most at night especially if you bury your left ear in the pillow. Try the fan trick. It sometimes helps here also. Good luck,

Mike  

Guys I need your addresses so I know where to send the bill;)))))
Mijostyn offers excellent advice about masking and determining what frequencies might be reduced or augmented to alleviate your problem.  Some McIntosh integrated amps offer equalizers that could be used for this purpose.  My issues are a bit different but masking certainly applies.  Good luck and happy listening.