Need to adjust the speed every time I turn on turntable

With my VPI Classic 3 SE Sig/w 3 belts/ADS.... there's a constant need for adjustment between listening sessions.

The Origin Live’s motor controller’s DC output drifts when cold and then stabilize once it warms up. 

I do not think so testpilot. He is setting the motor speed when it is cold. It should be the same next time he checks it cold. dcaudio, next time you start up check the speed but do not change it. Get an idea of how many dots drift by a fixed point in 10 seconds. Lets say it drifts 5 dots in 10 seconds. Check the speed again when it has warmed up for 30 minutes. How many dots does it drift now. Let us know what happens!!

This is a common problem with BD tables. It is caused by a combination of belt slippage (which can be cured with proper tension) and belt creep which cannot be cured, but can be compensated for with feedback. No matter how accurate the motor speed, without feedback the platter speed will vary over time due to a number of variables that cannot be controlled.

SOTA now sells a PSU and tach with feedback that will keep the platter on speed regardless of variables such as belt diameter and durometer, stylus drag, bearing oil viscosity, temperature, belt creep etc.
https://sotaturntables.com/product-category/eclipse-series/