Best Record Cleaning Fluid

The force of a stylus in a groove is tremendous, it will dig any grub out.

Play, keep em clean, leave em alone, UNLESS, when you check your stylus, it is grubby. Then, clean that one. I need to clean VERY FEW. 

I got a batch of Jazz records when young, been in a flood, mold, mildew, yuck. I filled the sink with soapy water, washed them with a soft sponge, rinse with tap water, let them drip dry in the dishwasher rack. Made a bath of distilled water, rinsed them, back in the dishwasher rack to drip dry.

1st play, a few had junk dug out by the stylus for me. Next play, wonderful. That was my free intro to Jazz.

elliottbnewcombjr

The force of a stylus in a groove is tremendous, it will dig any grub out ...

Nonsense. You will not get a dirty LP clean by playing it - even if the stylus is perfectly clean when you start. I’ve become increasingly convinced that many listeners have never heard a truly clean, pristine record, even after using the alcohol and other potions for which they have such faith.

Looking back voiceofvinyl obviously has a lot more experience cleaning records than I do. Tergitol would certainly be a reasonable additive to distilled water and it is quite true that certain fungi will grow on records. Down in Florida I saw many records that were stored in high humidity conditions destroyed by the stuff. You could see it on the records and sleeves not to mention smell it. I suppose if the growth were not that bad you might be able to bring them back. But in reality this is a record storage and handling problem. Records should be stored below 75 degrees in relative humidities no greater than 50%. They should be stored in clean plastic sleeves, upright under pressure by which I mean you should just have a little trouble getting another record in there. The classic orange crate works great until you can design record storage shelves which you can see in any Michael Fremer video. You should never leave your records flat or leaning. Ideally a record should go right from the shelf to the turntable preferably with a dust cover and grounded sweep arm 
( https://www.sleevecityusa.com/Antistatic-Record-Cleaning-Arm-p/tac-01.htm) then returned to to the sleeve and the shelf immediately after. 
The grounded sweep arm has been downplayed by various members on this forum. It does two things. It sweeps incidental dust out of the way of the stylus and discharges the record while it is playing so that the record never collects a static charge. The static charge is created by the stylus rubbing in the groove. Play a record without the brush and if you position yourself in the light right, as you remove the disc from your table you will see dust fly right to the record along with smoke and anything else that happens to be in the air at the time. Play a record with the brush and nothing flies to the record. The only way to improve on this is to play your records in a clean room. The brush is a little finicky in ways. The spindle to bearing distance has to be just right or it will not track the record correctly. Same if it is not clean. I have a piece of felt stuck to the table that I wipe it off on between plays and every so often I'll clean the felt with alcohol and a standard record brush. In 50 years of doing this I have not found a more effective way of keeping records clean in my hands anyway. I do not have a record cleaning machine. No need for one. For the rare outside or used record I use a spin clean with distilled water and alcohol. Anbody who thinks isopropyl alcohol damages records....how should I be politically correct about this. How's about," is susceptible to Marxist marketing schemes." 
I should also note in regards to my previous post that there are different kinds of brake cleaning fluid. The one I used was one of the old fashioned chlorofluorocarbon type (Freon).  Some of the newer ones might melt your record.    

mijostyn"You can take brake cleaning fluid and spray it all over a record and rub the crap out of it with a white cotton cloth and you will not see any residue on the cloth (assuming the record was clean) and there will be absolutely no damage to the record. I know that for a fact because I am listening to the one I just did that too!!"


This advise is reckless, dangerous, and uniformed brake cleaning fluid is not intended for use on vinyl just read the warning lable on the product  why would anyone take advise from this guy?? That mijostyn does not see any residue on the cloth does not mean that there is no residue on the cloth and to state without reservation, limitation, or qualification that brake cleaner does "absolutely no damage" to vinyl is not supported by any evidence presently offered by this user who seems to think that his simple observations carry any weight, value or authority this guy would benefit from an Introduction to Basic Science course perhaps he will get one when he reaches high school in a few years.

scott69"Many years ago I had the opportunity to evaluate record fluids and brushes. I found little to no differences in the cleaning effects of the 6 fluids I checked. Methodology - I sectioned a dirty record, cleaned them with commercial record cleaners borrowed from a nearby audio dealer and then evaluated the number of particulates per unit of area with a SEM (Scanning Electron Microscope)."

What a load of fantastic, imaginitive, misleading nonsense this guy does not know what he is talking about! One of my companies actually has one of these microscopes so I have talked with my engineering and scientific staff about how it might be used for this purpose because if anyone knows anything at all about SEMS they know they only work on electrically conductive surfaces! You will get all kind of errors and bad data otherwise this is just how they work! You could use an ESEM but they have their own problems mostly related to the pressure the sample is under this guy is bogus so I wouldn't belief anything he says.