2. home-theater
  3. 1243646882

Need help with Proceed AVP setup

hi, I just picked up a Proceed AVP used. Everything seems to work fine, but I can't get the On Screen display to show up. Before I punt, I was hoping someone could advise me on a couple questions:

1) Is there anyway to reset all operating settings to Factory Defaults? I've not been able to find a reset procedure in the manual.

2) Is it possible to do a total reboot of the software? ie where the system does a complete reload/

I was able to do this on my Lexicon and it usually solved minor issues like this.

thanks in advance.
bdgregory
dlcockrum's avatar
dlcockrum
2,190 posts
 
Glad to help out, Bd. The On Screen Display is a little finicky. Did you come out of the S-video jack to a S-video capable TV?

If you are watching a source through the AVP and hit the OSD button, what exactly happens (does the screen go blank, does it continue to show the source, etc)?

If you can get through this OSD thing, I think you will be impressed with the sound of the AVP, so hang in there.
bdgregory OP
1,715 posts
 
here's what happens . . .
I connected it using the S-video cable, but also tried a composite connection. The OSD will not show up at all on my DLP hi def projector. I can get video output (ie the TV or DVD player output), but no OSD with menus. When I connected it to a CRT low res tv, I can see the OSD but the characters are large - 2-3 lines is all that fits on a 26" screen, the words wrap on the screen so you can't really read them, and vertical hold is non-existent so it's scrolling on the screen very rapidly.
dogger's avatar
dogger
8 posts
 
Hello all...I just posted saying my Proceed AVP won’t power up and the fuse checks “OK”...any ideas that may help? I appreciate any/all guidance!
thanks,
Dave
lelistener192's avatar
lelistener192
1 posts
 
I doubt this will be seen, but I am having the same issue with the OSD not showing up on the Proceed AVP. I can route composite video input 4 (and only 4) to the main S-video or composite output but there is no menu overlay.

Alternatively, would it be possible for someone with an AVR to send a pic of the technical menu that is required to initiate a factory reset? I’ll try to do it blind.

I'd appreciate any help I can get because it is an excellent preamp and I'd hate to have to part with it.
fca_2121
1 posts
 
Hello! I also have a Proceed AVp with the same problem. I can't do any new settings. I'm trying to fix myself. I replaced the STV5730A, but the problem is still there. Do you have any answers from Mark Levinson?
More to discover