The one tweak most Focals need ...

I guess if I could describe the Mundorf MKP by comparison to Focal/Solen it is darker but a lot smoother.

The EVO scintillates. Adds a lot of color saturation at the mid/top end which is just not natural to my ears. That + the way those inverted domes sound naturally makes it go the wrong way.
The Clarity is more smooth, and also not nearly as dark as the MKP. It _is_ a better cap in absolute terms than the MKP, but ... like the Batman, I like the darkness. :)

Almost anything is better than the stock Solen PPA 250V caps.
There is also the inductor used for the woofer.  The wire thickness of the series inductor is embarassing.  You can measure a whole 1Ohm DCR in some cases.

Hey @johnsonwu

I agree with you about the caps, but sometimes DCR in a coil is a good thing, as it can be part of a baffle step compensation.  Don't go reducing that without understanding the circuit.

Especially in shunts like Zobel or notch filters.

Best,

Erik

erik_squires.  How much do you think to rebuild a new cross over for a 3 way speakers home made 8" woofer, Vifa 1" silk dome tweeter, Audax 3" carbon fiber midrange. 25-25000 hz.  I want especialy more top end presence and definition, mid and bas are OK.  The present cross over is glued to the interior baffle, so I would need to complete rebuild it probably.  The cross over parts are not well known and never find the brand on internet.  Would it worth to change the tweeter ?

audiosense -

There are three ways for you to go I think:

1 If you want to try inexpensively, update any caps in series with the tweeter and midrange.
2 Get a miniDSP and attempt to EQ your tastes into the speaker
3 Get a brand new kit.

The hardest thing for newbies to do is take an old speaker and switch a single driver. It's a lot of work, and may not be worth it due to the quality of the parts involved in the original, the cost of the new crossover, etc.

This is totally a great learning exercise. You will learn speaker measurement and analysis, you'll get new tools, and be able to dial in exactly what you want, but .... it is ONLY worth doing if you want to invest in yourself that much. To do it to reuse the parts you have, not really worth it at all.