2. analog
  3. 129564-4819

GLANZ MFG 610LX

I have been searching for this uber rare GLANZ cartridge since mid 80´s as I missed my opportunity to purchase one when it was for sale back in the day. I knew its reputation as one of finest cartridges available but I just missed it, young and foolish I was. In the same price category, I bought SHURE V-15V-MR instead.

Now thirty years later I owe one, NOS found in a barren town near the Arctic Circle. It sounds just fantastic out of the box. I am very lucky as this model is so seriously rare.
harold-not-the-barrel
nandric's avatar
nandric
4,086 posts
 

Dear chakster, Your basic premise is obviously that boron is

''better material'' for the cantilevers than ''aluminum'''. What if

your premisse is not true? The most aluminum cantilevers are

actually ''alloy''; usually with magnesium. Then the advantage

of aluminum is that the stylus can be pressure fitted . In all so

called ''exotic materials'' the stylus need to be glued. So there

is glue between stylus and cantilever. Pressure fitted styli have

more rigid connection with the cantilever. Then you own FR-

7f with aluminum cantilever which you seem to like very much.

Takeda san used aluminum for his Miyabi. Ikeda used aluminum

for the most of his cartridges. Andreoli used aluminum for his

Magic Diamond (+ other carts) while lately ''our own'' Dertonarm

used aluminum for his Archon, Aiwon and Palladian.

In my own ''modest'' collection FR-7fz, Magic Diamond, Miyabi

and Archon belong to my ''best'' next to Allaerts MC2, Benz

LP mr, Urushi Blue Sky , Ikeda 9C , Transfiguration Phoenix and

ZYX Airy 3-X.

chakster's avatar
chakster
6,144 posts
 
@nandric i’m talking about this particular Glanz MFG-61 cartridge with Boron cantilever and Parabolic stylus and all other Glanz cartridges with Aluminum cantilevers and Line Contact styli that i have tried. If all those Glanz have more or less similar sound, the 61’s model sound is completely different (much more refined on both ends).

Now you can look at the Glanz MFG 610LX model here
If you think there is a big amount of glue let me know. As i can see the nude LineContact diamond has been mounted using laser with minimum amount of glue, remember technics hollow pipe boron cantilevers with nude diamonds fitted almost like with the aluminum? It’s all about tip mass, the lower is better.  

Yes, the Ikeda’s cartridge sounds good with LineContact diamonds on Aluminum cantilever, but FR-7f generator is LOMC AIR CORE and i don’t see any single reason why should i compare this and that ?
uberwaltz's avatar
uberwaltz
13,381 posts
 
I see the 610 is still for sale on eBay at $455 right now.
After being extremely impressed with both the Astatic mf100 and the Glanz Esoter Azzura I am considering buying one.

Anybody who purchased one 2 years ago still around with long term thoughts on it?
chakster's avatar
chakster
6,144 posts
 
I assume after you will compare it to Astatic and Azzura these two will collect dust or will be for sale soon. Go for it, it’s the best Moving Flux available today.

The MFG-61 (not 610) is still doing well after 5 years. Rarely used, but very nice
uberwaltz's avatar
uberwaltz
13,381 posts
 
Thanks Chakster.

Placed my order today.

Atm, the mf100 is on the Garrard and the Azzura is on the jvc.

Probably move the mf100 to the JVC when the 610 shows up.
More to discover