Maybe that is what you need:
https://www.ebay.com/itm/Metal-Headshell-2g-or-4g-Shell-Weight-For-Technics-M5G-SL-1200-SL-1210-MK-2...
https://www.ebay.com/itm/Metal-Headshell-2g-or-4g-Shell-Weight-For-Technics-M5G-SL-1200-SL-1210-MK-2...
Cartridge Headshell Match
I recently purchased a Technics SL1200 GR.
I currently have an Ortofon MC Rondo Red mounted.
I plan on getting another Headshell and mounting a Benz Micro Glider that I just had re-tipped on it.
I noticed some headshells have azimuth adjustment which would be nice but weigh around 12 grams.
I can get a technics style headshell with no azimuth adjustment that weighs around 7.6 grams.
The Benz Glider weighs 6.6 grams
The Ortofon MC Rondo weighs 10.5 grams and sounds great with the stock Technics headshell.
The Benz is lighter in weight than the Ortofon by almost 4 grams so would that better mate with a heavier headshell?
I know this subject has been covered many times before but it still confuses me a bit.
I currently have an Ortofon MC Rondo Red mounted.
I plan on getting another Headshell and mounting a Benz Micro Glider that I just had re-tipped on it.
I noticed some headshells have azimuth adjustment which would be nice but weigh around 12 grams.
I can get a technics style headshell with no azimuth adjustment that weighs around 7.6 grams.
The Benz Glider weighs 6.6 grams
The Ortofon MC Rondo weighs 10.5 grams and sounds great with the stock Technics headshell.
The Benz is lighter in weight than the Ortofon by almost 4 grams so would that better mate with a heavier headshell?
I know this subject has been covered many times before but it still confuses me a bit.
- ...
- 24 posts total
''Match'' is relational notion between at leste two objects. But the related objects can ''on their own'' be different. This is the case by carts which have different fastening provisions. Some have threads with different dimensions such that different screws are needed to fasten the cart involved. Those without threads will need nuts in addition to screws. The headshells with ''azimuth provision'' have an added function. The possibility to adjust the eff. length by additional possibility to move cartridge (aka stylus)in either direction. The headshell weight relate to eff. mass of the tonearm. The lighter the headshell the lower the arm mass. |
I really don’t think I got my point across clearly. I’ll try and simplify it here. Turntable: Technics SL1200GR Cartridge Mounted: Ortofon MC Rondo Red (wt. 10.5 g) Headshell: Technics (wt. 7.6 g) I want to mount my Benz Glider (wt. 6.6 g) on the turntable with a headshell that I don’t have yet. I’d prefer one with azimuth adjustment. What has been suggested is the LPGear 10 g headshell or the Jelco 12 g headshell. I’m leaning toward the LPGEAR one because it is lighter. But would the Jelco be a better match for the Benz because it is heavier? |
No! If you want to add some mass you can add this 3 gram headshell weight. I doubt you will have to! https://www.amazon.com/Panasonic-Headshell-Weight-Technics/dp/B00U1Y8V1K/ref=sr_1_2?hvadid=786151235... |
Nick, the Benz is an intermediate compliance cartridge and your arm is on the heavier side. Go with the lightest headshell as you can always add weight. Much harder to take it away. Get the Hi Fi News Test Record. It has both vertical and lateral resonance tracks. You want between 8 and 12 Hz. I always shoot for between 8 and 10 Hz because I think the bass is better. You could be lucky and not have to add any weight but the test record is the only way to know for sure what you are doing and it is short money. |
- 24 posts total