Can two subwoofers reduce a bass problem?

Which mini dsp do you recommend Eric?

oh, I mean, without bass traps, nulls are hard to fix. If you get some, then you should find the nulls are easier to pry.

As for which, for RCA connections:
https://www.minidsp.com/products/minidsp-in-a-box/minidsp-2x4-hd

For balanced:

https://www.minidsp.com/products/minidsp-in-a-box/minidsp-balanced-2x4
The HD part means 96/24 sampling is used.

Best,
Erik

Thx Eric!

So you think you can use one of these on just the sub only?

Most interesting.

Erk, I have an extra set of rca outputs on my pre which I would use to go the the stereo subs. Would I stick the minidsp between the pre and the subs? Don't need to touch the signal of the mains?

To uber and bstatmeister:

That's what I do, so long as the pre signal is controlled by your volume control.

The bad news is you have no control over the satellite's frequency response. On the other hand, you also can't mess it up.


Since the miniDSP is so flexible however, you can really tailor the sub's output for maximum integration with the satellites.


If your current satellites are ported, you may find it easier to integrate by stuffing those ports closed.


The key here though is measurement and delicacy of setting. Worthwhile reading the white papers on their site and hanging out in the Room EQ Wizard forums.  I use OmniMic for my measurements. It's a little more expensive but I love how easy everything is and the built-in DSP curve simulator. It lets me try out different curves and see them before I copy them to miniDSP.