Moving cables around killed dynamics for days anyone else experience this?


I've been experimenting with different cables between components. Nothing sounds right since trying to improve sound with new mix of cables. There is no bass and boring, highs are okay but life is gone from system. So I flipped everything back the way it was still sound horrible. Ran everything 24/7 for a couple days still no go. Let it run a couple more days dynamics are back and bass is full big and has tone again and enjoyable to listen to. Can someone tell me why this happens. I've also moved just speaker cables around without unhooking them and seen this happen, I don't get it.
paulcreed
Moving cables and the affect it can have on your sound has been discussed for decades. This is not something new or earth shattering.
However, when it comes up now and again for discussion, oh how the knives come out.
Moving cables and the affect it can have on your sound has been discussed for decades.



Sure: Among audiophiles, who have also discussed "for decades" the "sonic effects" of a vast amount of pseudo-scientific "effects" (often barely that). There is literally no pseudo-scientific idea that an audiophile hasn’t come up with, that didn’t have some portion of audiophiles saying "He’s right! I can hear the difference!" That’s because audiophiles generally don’t employ methods that control for their imagination.
That’s understandable to some degree due to practicalities involved, but many audiophiles go further to even deny the problem even exists.


Back to moving cables changing the sound: In the pro sound world, who use vastly more cables than audiophiles, no this does not come up. That is beyond using cables along well known parameters. I’ve recorded in, visited, and worked in many pro studios and not ONCE has this worry of "moving cables will change the sound" been either a problem or even raised as a problem. Because generally, there doesn’t seem to be good reason (beyond subjective audiophile hand-wringing and an appeal to golden ear hearing) to think it’s a problem.


If significant sonic changes occurred to cables simply because they were moving, guitarists would have had to stand statue still while performing on stage lest their sound keep altering. But they don’t do that, because they don’t have to. Guitarists (and other musicians) have used cables that writhe around on the stage or recording floor as they move and no engineers stress about "sound obviously changing" (even with unbalanced cables) due to "cables moving" (so long as the cables can stand the stress of movement, aren’t landing on power cables or whatever). Look at photos of Led Zeppelin or any other band performing. Look at the cables snaking all over the floor. The horror!


And when recording, engineers/musicians move cables around all the time and NO ONE  says "We’d better wait a few hours - or days - for the cables to "settle" again or we can’t get the sound right. That nonsense doesn’t fly in virtually any pro setting. It’s the provenance generally of hand-wringing subjectivist audiophiles, for good reason.





Sure: Among audiophiles, who have also discussed "for decades" the "sonic effects" of a vast amount of pseudo-scientific "effects" (often barely that). There is literally no pseudo-scientific idea that an audiophile hasn’t come up with, that didn’t have some portion of audiophiles saying "He’s right! I can hear the difference!" That’s because audiophiles generally don’t employ methods that control for their imagination. 
That’s understandable to some degree due to practicalities involved, but many audiophiles go further to even deny the problem even exists.
So it's all conveniently down to a nicely worded, broad generalization.
Back to moving cables changing the sound: In the pro sound world, who use vastly more cables than audiophiles, no this does not come up. That is beyond using cables along well known parameters. I’ve recorded in, visited, and worked in many pro studios and not ONCE has this worry of "moving cables will change the sound" been either a problem or even raised as a problem. Because generally, there doesn’t seem to be good reason (beyond subjective audiophile hand-wringing and an appeal to golden ear hearing) to think it’s a problem.
In the workplace you describe, you're just duplicating a product, not listening like you would at home. As long as it sounds OK and meets the standards, you can then can it and sell it.
If significant sonic changes occurred to cables simply because they were moving, guitarists would have had to stand statue still while performing on stage lest their sound keep altering. But they don’t do that, because they don’t have to. Guitarists (and other musicians) have used cables that writhe around on the stage or recording floor as they move and no engineers stress about "sound obviously changing" (even with unbalanced cables) due to "cables moving" (so long as the cables can stand the stress of movement, aren’t landing on power cables or whatever). Look at photos of Led Zeppelin or any other band performing. Look at the cables snaking all over the floor. The horror! 
In a live performance, I can't imagine how one would know, let alone ascertain, how a performance would sound before, after, or while moving. Talk about a red herring. Why didn't you include a revolving stage while you were at it? 
And when recording, engineers/musicians move cables around all the time and NO ONE says "We’d better wait a few hours - or days - for the cables to "settle" again or we can’t get the sound right. That nonsense doesn’t fly in virtually any pro setting. It’s the provenance generally of hand-wringing subjectivist audiophiles, for good reason.
Has it ever occurred to you that the signal is getting through during the recording but it's with the playback at home in a settled environment that one can hear it? Two completely different settings.

All the best,
Nonoise


Good one, prof! Textbook pseudo-scientific anti-audiophile screed with a little pseudo-philosophy thrown in for good measure. Filled to the brim with non-sequiturs and strawman arguments. 
I dont understand that people use their intelligence to defend dogmas or attack dogmas...

I dont have opinion or experience with the moves of cable and the changing sound...I respect equally those who have report positively about that and those who are not..The 2 opinions and experience are intriguing and interesting... This debate cannot be resolve once and for all without our own involving experience...And it will be only our personal conclusion, because in audio the conditions of experiment are most of the times too peculiar or complex to reproduce with the same electrical grid, the same system, the same room, etc. and different ears also...

It is better to open the brain to the heart and to the ears … :)


I propose a blind test:
close your eyes, listen to the brain; after that listen to the heart... Assess the difference for yourself, and choose your boss...