Tubed Monos for Focal Aria 948s

Thank you everyone for the replies. As I expected, there is a good bit more to understand before making a selection and your information cuts down on research time.

@erik_squires I was wondering where that part of the signal went. I love the sound of these speakers but always felt that they needed a little something extra. Thank you for defining the problem.

@213cobra I was under the impression that the crossover design made it easier for amps to drive the speakers. If that is incorrect then I will have to take that into consideration. I was looking at a pair of Prima Luna Dialogue 7 monos ($4800) or the EVO 400 which are twice as much. The 7s I could get in a month, the EVOs would be 4-6 months but I am going to look into your recommendations now. I have the Odyssey Kismets hooked up at the moment so SS is not a deal-breaker at all. I'm looking at tubes just to see if I can warm things up a bit but as Erik pointed out, whatever I choose will have to compensate for the 100Hz dip.

Check out Quicksilver's new 120 watt mono amps...

@oddiofyl You are the second person to recommend the Quiksilver 120. I will send a message to the company and explain what I have. Erik_Squires mentioned the 100 Hz dip so now I'll be focused on that as well.

Again, thank you everyone for the information.

+2 for Quicksilver Mono 120s. Got some too. Love them :)

Also, I helped my sister to acquire Focal 948s and for her we chose a simple 100w Peachtree integrated (with tube input) for her family room. Goes plenty loud, and I’m certain QS Mono 120s would be plenty, I’ve heard them with large 7 foot tall IN-effcient electrostatic and large multi-driver speakers. Mono 60s could work too, with a bit less grunt than Mono 120s. 948s are known to be bass heavy so pick your poison with QS Mono amps.

Mono 120s are what I use for my own multi-driver electrostatics in my main system now. Takes a while for tubes and caps to burn in. Once that happens, they really take on a nice smooth sound.

Mono 120s have the finesse of lower power amps with large transformers and proper circuit and plate voltage to drive the KT150s.
I’m a 40-year mosfet solid state amp guy and love these amps. Mike did a really nice job on them, switch on the front and AC/speaker on the back, with KT150s and quality build and I’ll say it again, large-quality transformers in a well known proven circuit design. They run 12AU7 input and 12AT7 drivers, so tubes are not crazy expensive if you want NOS or boutique tubes. I’m running NOS 1960s Mullard input/drivers elevating the sound to true high-end, totally 3-dimensional, nice midpoint sound stage, dead quiet. Again, need to burn them in 200+hrs.

Mike’s standard Linestage preamp (non-remote) version is a nice preamp for them, great value too. However, I run a different 6SN7 based preamp (already had it), and it pairs sooooo nicely with these Mono 120s. Comparable CJ KT150 based amps are $19k, over 4x the price. I’d put these up against it all day long. Value$ !!!

Keep the bias at 40ma and they run COOL! Any of my former Class-A, or better Class A/B solid state amps ran warmer than my Mono 120s. The more I listen to the KT150s, the more I really like them, more than I thought I would and I tend to generally like EL34 sound. The KT150s have more top-air, more bottom end, and the right amount of midrange without being syrupy in these amps. Mike nailed it with Mono 120s for my custom speakers.