Yes, hello again and thank you. I used the Imgur as suggested, please see link below. It certainly does not appear to be a Monster cable product to me.
https://imgur.com/iNyyD3W
https://imgur.com/iNyyD3W
Can anyone identify this speaker cable?
Hello and thank for your help!
I tried to insert a picture here, but I could not figure out how to do it, so I will explain the speaker cable as best I can.
I recently received two 15' runs of cable as a gift, the previous owner found them stashed away and has no recollection as to what they are. I measured the cable to be 16 AWG Gold plated copper maximum twist wire, the insulation is clear and almost seems to be nothing more than a very light coating of something covering each wire of the twisted pair. I measured the resistance end to end and it came out to be 0.0005 ohms, the same as shorting my meter leads together. Lastly, the wire is fairly stiff.
I have not yet inserted the cable into my system because it would be a major pain and I'm not sure 16AWG wire is a sufficient interface between my Krell Amp and Sonus Faber speakers. I am concerned about this light of a wire handling the current demands at elevated listening levels.
Any ideas as to my description? Can anyone tell me how to get a picture in here? Is this a good cable?
Thanks!
I tried to insert a picture here, but I could not figure out how to do it, so I will explain the speaker cable as best I can.
I recently received two 15' runs of cable as a gift, the previous owner found them stashed away and has no recollection as to what they are. I measured the cable to be 16 AWG Gold plated copper maximum twist wire, the insulation is clear and almost seems to be nothing more than a very light coating of something covering each wire of the twisted pair. I measured the resistance end to end and it came out to be 0.0005 ohms, the same as shorting my meter leads together. Lastly, the wire is fairly stiff.
I have not yet inserted the cable into my system because it would be a major pain and I'm not sure 16AWG wire is a sufficient interface between my Krell Amp and Sonus Faber speakers. I am concerned about this light of a wire handling the current demands at elevated listening levels.
Any ideas as to my description? Can anyone tell me how to get a picture in here? Is this a good cable?
Thanks!
- ...
- 15 posts total
Its called lamp cord. Sometimes companies like Monster put shiny ends on the lamp cord and mark it up to audiophools. Audiophools are with shiny stuff like Mongo with candy. Mongo like candy. Audiophools like shiny. Like that.That doesn’t look much like monster or lamp cord to me? I started out liking everything you were saying, now after reading a bunch of your posts I am getting just a bit skeptical. |
Looks like some type of magnet wire cables to me. I had a pair of the original Anticables speaker wire that looked similar to that, but had a different color of enamel on the outside. If it is super stiff, solid core, with thin enamel coating, it's probably magnet wire. Also, considering the type of banana plugs on them, they are probably a DIY build. |
jetter Its called lamp cord. Sometimes companies like Monster put shiny ends on the lamp cord and mark it up to audiophools. Audiophools are with shiny stuff like Mongo with candy. Mongo like candy. Audiophools like shiny. Like that.That doesn’t look much like monster or lamp cord to me? I started out liking everything you were saying, now after reading a bunch of your posts I am getting just a bit skeptical. >>>>>Say it ain’t so, jitter. 😫 |
- 15 posts total