Has Anyone Placed Power Conditioner On Its Face with the Power Outlets Facing Up?

This can be a real problem check it out.

@erik_squires 

Can you elaborate about the laminations?

@millercarbon
I'm concerned that the heavy transformer will vibrate. I suspect they have ssome kind of damping to keep vibrationat a minimum when resting on its botttom. But what happens when that weight is suspended  from the  cabinet. Then too, IIUC, Eric is saying that the lamination may be problematic

@tweak1 
I have talked to Wally. he says it should work. But I suspect this is as much guess as anything. No disrespect meant.

@testpilot 

If it can survive shipping where it is violently thrown around, it will survive being gently placed on its side.

May be the best answer yet.

Hey OP,

The reason a transformer hums has to do with the quality of the AC, and it's internal construction.  DC on the line, caused by too much draw from the positive or negative AC power is the usual suspect, as are manufacturing deficiencies in construction.

You can read about this in much more detail here:

https://testguy.net/content/259-Transformer-Humming-Noise-Explained

But the point is, the orientation of the transformer in regards to the earth is not what causes it, nor is the chasis design. Mechanical hum is a matter of the transformer, and incoming power. Now, it is certainly possible that hum may be louder in one orientation than another. :)

artemus

none taken. Too often people ask for help from those who do not have a vested interest in the outcome, which is why I directed you to the source

@erik_squires 

Apparently I didn't understand your 1st post. Your last one says,

The reason a transformer hums has to do with the quality of the AC, and it's internal construction.  

If this is the case than it makes no difference how the box is placed. Is that your point?