Although in general the harder the cone material, the more we have to do deal with frequency break up or frequency rise in speaker design, today, you can no longer make the broad statement about any specific tweeter design based on material used. Todays speakers have been designed with a multitude of damping materials and most of the phenomenon thought of in specific cone materials don't apply if a tweeter is well thought out in the design phase. Next, the minor problems that are not corrected in the tweeter design, can certainly be handled in the crossover. Any well thought out speaker today, should be fairly accurate with a minimum swing in frequency across its bandwidth.
Tweeter type and brightness
I presently own Martin Logan Odysseys that I purchased new in 2005. I've enjoyed them very much but I'm having to replace the power supply board in one of them as I did in the other one about 5 yrs ago and I'm thinking that it may be time to look into speakers using more recent technology.
I auditioned several new sets at Sound Advice including the Monitor Audio silver 2, 6, 8 and 10 plus a small pair of ML's. I thought all of them were very good. Additionally, I bought a pair of Jamo Concert Eights several months ago that were fantastic for my type music which is mostly solo guitar. I regret selling them but at least I learned how good quality bookshelf speakers can be.
Anyway, I've read in several posts that metal dome tweeters have a tendency toward exaggerated or tinny brightness which can be very uncomfortable for me because of a hearing issue that I have. I want to avoid this and am asking for advice regarding this experience of others and what tweeter construction, if any, is generally best to avoid what I call screechiness.
I've been told that the technologies that best avoid this are ribbon tweeters or domes of some softer material than the various metals used in many of them. In one of the forums here on Audiogon this subject was discussed in some detail and at least several participants seemed to minimize the relationship between tweeter design and this problem. They suggested that more likely potential causes would be such things as room acoustics, interconnect quality, rake, crossover problems, etc.
I agree that each of these considerations could lend to the issue but I'm looking for a good starting point to at least minimize the contribution of the speaker design to this problem.
I've heard the gold series Monitor Audio speakers which do incorporate ribbons and they seem to work perfectly with my music but they, like the larger new ESL's are substantially outside my current budget limits. I'm currently using some borrowed temporary speakers while I'm waiting for the new circuit board so I can sell my Odysseys. In the meantime I would appreciate any advice I could use to help with an approach to selecting a speaker best suited to my needs. My upstream equipment includes Shanling solid state CD player, CAL DAC and Rogue Audio Sphinx 100W hybrid amp.
I auditioned several new sets at Sound Advice including the Monitor Audio silver 2, 6, 8 and 10 plus a small pair of ML's. I thought all of them were very good. Additionally, I bought a pair of Jamo Concert Eights several months ago that were fantastic for my type music which is mostly solo guitar. I regret selling them but at least I learned how good quality bookshelf speakers can be.
Anyway, I've read in several posts that metal dome tweeters have a tendency toward exaggerated or tinny brightness which can be very uncomfortable for me because of a hearing issue that I have. I want to avoid this and am asking for advice regarding this experience of others and what tweeter construction, if any, is generally best to avoid what I call screechiness.
I've been told that the technologies that best avoid this are ribbon tweeters or domes of some softer material than the various metals used in many of them. In one of the forums here on Audiogon this subject was discussed in some detail and at least several participants seemed to minimize the relationship between tweeter design and this problem. They suggested that more likely potential causes would be such things as room acoustics, interconnect quality, rake, crossover problems, etc.
I agree that each of these considerations could lend to the issue but I'm looking for a good starting point to at least minimize the contribution of the speaker design to this problem.
I've heard the gold series Monitor Audio speakers which do incorporate ribbons and they seem to work perfectly with my music but they, like the larger new ESL's are substantially outside my current budget limits. I'm currently using some borrowed temporary speakers while I'm waiting for the new circuit board so I can sell my Odysseys. In the meantime I would appreciate any advice I could use to help with an approach to selecting a speaker best suited to my needs. My upstream equipment includes Shanling solid state CD player, CAL DAC and Rogue Audio Sphinx 100W hybrid amp.
- ...
- 55 posts total
- 55 posts total