Anyone using their Jolida JD 100 as a transport?

I have Sol 6.2's right now. Good little speaker! I bet you're going to like the Silverlines. Good choice.

I used to have the Jolida paired with a Theta DAC, I replaced it with a CDP with volume control. I still miss the Jolida.

I tried a couple of pairs of GE tubes and didnt much care for either of them. In fact the JAN GE's were aweful in this player. I really loved a pair of smooth plate telefunken 12ax7s but they are pretty expensive.

However, a brand new matched pair of gold pin Electro Harmonix 5751's came very very close to the Tele's. I bought mine at Boi Audio Works for $38.00 a pair. I strongly suggest trying these.

You might also consider some of the EI brand 12ax7s. I tried the silvers and while good, they had a bit to much sparkle for my system.

I tried several powercords on my Jolida. All had some impact but my best results were with a Virtual Dynamics power 3 (used 1.5m about 100.00). I like the VD brand PCs but I had good results with Signal Cable, MIT, and Transparent brand cables as well.

To sum up. I would try a few changes, especially tubes, before you decide to change. The Jolida is one sweet and seriously capable CDP. I liked having the SS DAC along with the tube CDP. Some recordings sounded better on the DAC than tubes ...not many though!

Distortion... I've taken your advice and ordered some RCA NOS tubes from Andy @ Vintage Tube Services. Andy was very knowledgeable and helpful. I have already upgraded the power cord to a Cardas Cross.

My next project is to replace my BAT VK 200 amp & VK 30 preamp with a high quality integrated (trying to simplify things). I'll probably list my BAT gear tonite, along with a SinglePower tubed headphone amp.

All right. I've already sent an email to Andy asking for my spiff =).

I bet your going to like the sound with those in. If you dont, maybe try one more set of tubes and if it still doesnt work out, sell the whole setup and rest assured you gave it a thorough attempt.

Pdher, what integrated do you think you will find that can match your BAT combo? You have a seriously sweet match with those two. I was looking at a BAT VK-300 to replace my VK60 & my dealer told me not too. He said the 300 is VERY nice but not quite close to what I have. I would seriously think about what I was going to use in place of what you have before you sell. Good Luck.

Fish... I'm looking at the VAC Avatar SE or Avatar Super. My speakers are Silveline Sonata II's, and at 95dB effeciency, I don't need the BAT power... plus, I like the idea of simplifying my system and going with an integrated and fewer cables.