2. tech-talk
  3. 159902-150622

Turntable choices

Have owned a Bang & Olufsen 8002 turntable for 35 years and value highly it's tone-arm control features.  I've lost an output channel while upgrading my pre-amp from a McIntosh C32 to a McIntosh C47.  A rebuilt 8002 w/an MMC4 rebuilt cartridge is available on Ebay for $950.  My question is: do I stay with the B & O, maybe upgrading the cartridge or look at a new turntable with 35 years of new technology "under the hood"?
128x128alaskabluesman
dekay's avatar
dekay
5,559 posts
 
If all you did was unplug/replug the DIN/RCA cable then check that (have a spare?), and also check the new preamplifier.

You might also register here and ask for advice...

https://forum.beoworld.org/forums/

Regardless it should be a simple fix.

DeKay


jjss49's avatar
Ag insider logo xs@2x
jjss49
6,612 posts
 
what miller said!!!
alaskabluesman's avatar
alaskabluesman OP
4 posts
 
I've checked the turntable with a McIntosh C32 preamp and yes I'm still only getting one channel of music so the newer C47 is OK.  Next check will be a new connector to the turntable, if I can find one.  
mapman's avatar
mapman
22,198 posts
 
https://www.kickstarter.com/projects/493608538/love-the-worlds-first-intelligent-turntable

Stumbled on this.    Don’t know anything more about it but interesting.  
mijostyn's avatar
mijostyn
8,570 posts
 
alaskabluesman, those turntables are getting very old and they are highly mechanized. I think it is time to put them to bed. The problem is that there are very few if any modern turntables that are that animated. There is a German straight line tracker that is fully automated and it cost $200K. 
There are some turntables with an auto lift feature which is nice but you can add that to any table. There are several good lifts on the market.
Looking at the bright side it will not be hard to find a turntable that will perform better than the B+O but not for $900.00. What are you willing to spend?
More to discover