change amps or speakers


I am powering Eminent technology LFT8bs with quicksilver M60 monoblocks.  No preamp - I am running a dac directly to the amps, which works because with this configuration I am using very little attenuation.  Problem is it is obvious that the ETs require more current and/or wattage- the detail is there but not the punch and there are times when I am maxed out on volume at 12 0'clock and need more. Question is do I change the amps or speakers - I love the quicksilvers and put some serious $ into modifications.  A well respected friend/tech highly suggested I seek out a used pair of PSB stratus golds. I have a medium sized family room and like detail neutrality but need more rhythm and dynamics. Thanks you.
majorc
Given you like your speakers and the QS amps, my thinking is with those who recommend trying the KT88 tubes and an active preamp. 
You have some wonderful monoblocks, they deserve a better speaker than the PSB. I owned PSB Synchrony and wouldn't pair this 4 ohm speaker with a tube amp. It takes power to drive the bass.

@majorc
I’d get a good matching tube preamp no matter what. Tons of threads on this topic alone. If you do order a Linestage preamp from Mike at QS, heads up, for $50 upgrade service fee, he can convert the TapeOut to a 2nd set of PreOuts if yourdecide to bi-amp as others suggested earlier. Or, use the added pre-outs to add a really good subwoofer for added bottom end your mono 60s won’t have to make up for. A nice sub could fill in bottom end and let your LFT8s flow with KT88s in the Mono 60s. Add good tubes in Linestage preamp from Mike@QS.

Local Tech Option: 
You mentioned a local tech. Yes, a good local tech can also upgrade coupling caps in those amps to much better ones to add transparency you are looking for, along with checking tubes, re-bias. I upgraded my own QS Mono 120s with Mundorf Supreme EVO Silver-Gold caps, and the upgrade has been very rewarding. Yes, see your tech! 

Option-C:
Check this out. If you keep the LFT8 speakers, you could do the preamp now, add KT88s, run for 1-2 years. Then,wait for KT170 based amps to come out next! Yes, did not mis-spell. New tube coming from Tung Sol would be perfect for your LFT8s. :) Guarantee you’d love those LFT8s all over again with a bit more drive.
https://www.instagram.com/p/CG77jvZJEoH/?igshid=xj8re0i2fhl2