2. speakers
  3. 161200-87347

Flat screen between speakers, again.

I know this has been discussed before, but after reading most of the somewhat recent responses to similar questions I still need to pick your collective brains.
To mitigate the TV's impact, I am considering building a panel that would cover the TV when it's not in use. The panel would be a 2.5' x 4.5' diffuser or absorber. Ideally it will hang above the TV when I am watching TV and would lower down to block the TV when I am listening to music.

My question is whether this is a viable solution and, if it is, would I be better served with diffusion or absorption?


128x128tony1954
tony1954's avatar
tony1954 OP
1,123 posts
 
@glennewdick

I will definitely give the angling a try. I have a TV mount that allows for angling and of course it is currently set up to direct everything directly at my head.

noromance's avatar
noromance
9,931 posts
 
cheap foam absorption panels that are quite light.
Never use pyramid foam. It sounds bad. I tried it and now it's stacked in the corner. 
mijostyn's avatar
mijostyn
8,570 posts
 
Tony, assuming the TV is directly in the middle between the speakers and there is some space between the main speakers and the TV you do not have to do anything. The TV is inside the important first or early reflection points. You may want to put some absorption on either side of the TV and on the side walls. Most importantly is to make sure nothing in the TV rattles. That drives me nuts. 
tuzarupa's avatar
tuzarupa
65 posts
 
Tony - where are the speakers located relative to the position of the screen? Is the Screen mounted on a wall?
I concur with mijostyn.
When I had my speakers on either side of my screen they were ~8" in front of the screen. Experimentation demonstrated to me that there was no change in sound quality when the screen was blanketed.Your situation may be different and some reasonable suggestions for experimentation have been given.In the end - if it ain't broke, don't fix it.
twoleftears's avatar
twoleftears
5,318 posts
 
The other place I tried the GIK panels was perpendicular to the wall behind the TV (and hence also to the TV itself), with one side edge of the panel touching the wall, and snugged as close to the edges of the TV as possible.  This was more effective than panels sitting directly in front of screen and nearly as effective as 45 degree positioning described above.
More to discover