Should I use Speaker Spike / Isolation Base or Something?

The route is not conclusive as I thought. Kind of tricky situation indeed. 
Thank you for the advice. 

Let’s start with: how heavy are your speakers?

Heavy? Perhaps wheels!  Of course spikes make sense theoretically, but why sacrifice flexibility (alternate toe-in, alternate locations) for theory if you don't benefit from the theory.

I've always had heavy speakers. I've done spikes, feet with textured grips for carpet, thin felt disks to not scratch wood floors, and wheels (3 not 4, more weight per wheel) (rear corner blocks slightly shorter than the rear center wheel, to prevent tipping).

Nothing is lost when going from spikes to wheels if heavy enough. i.e. 80lbs? go to home depot, pick up an 80 lb bag of cement, it can be on wheels and not vibrate. I'm not sure what the minimum weight is when spikes might be advantageous. I would buy some spikes and compare them to the factory solution, simply listen. 

I believe in having ease of movement (mark your best positions somehow), I adjust toe-in when others listen with me to get a wider center, each of us hear both channels well. I push them half way back or fully back depending on size of dinner party, big picnic/crowd, all entension leaves in the dining table ...

btw, it's weight per contact area, with spikes, the contact area is the area of it's protective disc, and that is about as big as a small felt or plastic self adhesive button. something small in the 4 corners, or 3 wheels for very heavy speakers is my recommendation.

Let’s say 67lbs (30kgs). 
One thing I’m not sure is, the speaker has pucks under it. So if I had a hard floor, then I would def just put it. But my rooms is carpeted. 
So, not sure whether I better just put it on the carpet (have the most flexibility), or put a heavy wood piece (3” thick) between carpet and a speaker or spike a speaker. 

Years ago when I had big ATC speakers I always thought the bass could be better so I got a couple of slate slabs to put my speakers on and that certainly helped. I thought it could be better still so I went on E-Bay and bought some car valve springs and put 4 under each speaker and what a difference that made. Try that .a very worthwhile fix for not a lot of money.

millercarbon has the right idea and I can vouch for springs.  I went through gliders, spikes, no spikes, spikes on 1 1/2 inch stone.  I finally settled on Townshend seismic podiums.  They are on carpet on a second story suspended floor and are the clear winner.  To me they are an essential component.