impractical to spend $200 to terminate Mogami 3103 speaker cable??

Thanks no romance...was not aware of Rhodium having a signature. What's the word on the street there (-:... I ordered these from performance audio, and correct, as bare wire. They dabbed around 1/3" of solder on each end, and I don't like the connection much. The only way I could see this working is if I strip these down, and expose more unsoldered wire. I'm using the Mogami in to a Luxman 550 AX II, and Harbeth C7's. Source from main system is a Kuzma Ref 2. I've yet to purchase a source solely for the Luxman/Harbeths. I'm still breaking in the Lux, it's only a few weeks old. Cheers -Don

I have had great results with KLE Classic Harmony Banana Plugs. Not locking type but good spring for a solid connection.

Audio Note makes great stuff as well also WBT.Good luck!!

You used Cardas Eutectic or WBT 0820 I hope.
If it ain't got the lead, your sound is dead.

I had bad experience with Furutech locking bananas with rhodium plating. 2 things happened:

1 - They diameter of the plugs were subtly but importantly undersized. Maybe 2 millimeters. This meant that on some speakers they  simply would never be tight enough. Focals in my case then.

2 - They permanently deform very easily.

Rhodium is honestly too hard a material. You want something soft that will allow it to bend to the shape of the mating metal. WBT’s locking bananas are far superior. They are noticeably tighter even when closed, and do not deform even after multiple insert/remove cycles.

I looked at the KLH plugs. I’m sorry but solder is not a good way to connect speaker cables to speakers. You want to use the crimp sleeves with a lot of pressure, and insert those into your WBT plugs or similar. The spring loaded spades or bananas are great.