Speaker outriggers

@gbnrbob it’s pretty level, it’s new construction, but it’s a concrete slab so it’s not perfect. The one speaker sits rock solid with no shims. The other needs just a really thin metal washer between the spike and cabinet the get it perfect. I was checking out the Herbie’s stuff. Thanks

My listening room is ~ 19 x 35 and is 100% mexican tiles, which are a nightmare when it comes to balancing furniture, and especially equipment. I tried similar adjustable spikes to the Daytons, and found them hard to place and adjust under speakers.


Consider that rooms are usually compromised in many ways, furniture, dimensions, type of walls (dry wall/stucco over lath...) so, my solution was to buy dollys from Harbor Freight, which have rubber wheels. @ ~ $25/set, an added bonus is the ease to move the speakers around to find the sweet spot

hth

@jmphotography ,
There seems to be two  schools of thought when it comes to isolating speakers.
One, like millercarbon aludes to uses springs to isolate speaker vibration.
(And, I do use the Townshend products under my equipment, though not under my speakers).
The other is one that Vandersteen uses, which entails using a thick piece of marble on which the speaker sits using spikes that are set on a special felt that reduces movement and anchors the speaker to the marble base.

Being a cheapskate, I opted for 3 inch butcherblock with some sorbothane pucks under them. It works well for me.
YMMV.
Bob

There are a couple of big benefits of outriggers:

- speakers are more stable and less likely to tip over from side forces.
- super easy leveling
- minimizes contact with flooring.

The other thing to keep in mind is to minimize the back and forth motion of the cabinets.  After you put the outriggers on you may want to try adding mass to the top of the cabinets.