guess the OP isnt going to reply ?
Raise your acoustic panels or die
Hi everyone,
I just had an interesting result while waiting on new panels from GIK. I've been pretty lazy in setting them up, nothing is hanging. Everything is just placed on the floor around the speakers. On the wall behind the speakers I have 2 Soffit Traps and 2 standalone panels inside them. Kind of like this:
(ST) (P) --------- (P) (ST)
With the traps standing up vertically. Last night I decided to put the panels directly on top of the soffit traps, giving me near floor to ceiling coverage in that corner. Lo and behold it raised the stereo image by a good 15-20 degrees or so. Orchestral instruments now appear above my tweets.
So, if you have been leaving all your panels on the floor for convenience sake I strongly encourage you to raise them so they are more centered around the speaker, instead of at and below it.
I just had an interesting result while waiting on new panels from GIK. I've been pretty lazy in setting them up, nothing is hanging. Everything is just placed on the floor around the speakers. On the wall behind the speakers I have 2 Soffit Traps and 2 standalone panels inside them. Kind of like this:
(ST) (P) --------- (P) (ST)
With the traps standing up vertically. Last night I decided to put the panels directly on top of the soffit traps, giving me near floor to ceiling coverage in that corner. Lo and behold it raised the stereo image by a good 15-20 degrees or so. Orchestral instruments now appear above my tweets.
So, if you have been leaving all your panels on the floor for convenience sake I strongly encourage you to raise them so they are more centered around the speaker, instead of at and below it.
- ...
- 41 posts total
I see 9 windows a 4 ft opening into another room a stairwell that is probably 3ft wide a 24×30 return duct and a ceiling fan which can be a benefit. The return duct can be fronted out and I think it is as a table..but trim out with louvered doors. All the windows should have partial sun bloc pull down cloth shades. 2 main area of concern is to be able to balance the left and right sides of the room..1 side has a much large opening than the other. There will a noticeable difference in pressure L to R not just freq.response so you may have more image wander than you may care to see. Good luck wherever you are. Tom |
@erik_squires I agree that all dimensions really must be tried. I’m curious if you’ve investigated different stands for your panels. I have found that some panels need to be raised off the floor and kept away from the walls a bit. Have you purchase stands for panels, ever? Or made some? Here’s the kind of stand I mean (obviously without the white board): https://tinyurl.com/4cwben3r Here's a neat DYI solution that looks much better: https://www.gearslutz.com/board/showpost.php?p=8774501&postcount=19 |
- 41 posts total