Isoacoustics Gaia III for Focal Aria 936s my next tweak?

Thanks @millercarbon, I think I’m going to pass through the Gaia first. I can always use them on my second system if I upgrade to the Townshends later.

Again very disturbing marketing.  Speakers can certainly get floor resonances going and they will do it solidly connected to the floor or not along with resonances in the ceilings, windows, walls and so forth. Just play a bass heavy number and put your hand on the wall and you will feel it resonate. All this resonance alters the frequency response of the system and is best corrected by room control not these feet which are terribly non specific and unpredictable even though they are specified for certain weight ranges. With a good room control system you can see exactly what is happening and correct it exactly. The feet are stone age technology. Yes, they might change the sound but there is no way you can tell if for better or for worse. Get a calibrated measurement microphone and an impulse testing program and you can see exactly what they do which will be not a whole lot. When you see the frequency response of your system in your room you will probably get nauseated. 

I guess that's why tons of recording studios use them.
And swear by them. And they use all sorts of room control.
They're all in on it.

All the best,
Nonoise

MC, have you tried the GAIA footers or are you just blowing smoke up our a**?   I ask because the GAIA II are being used under my GE Triton Reference speakers and it was well worth the $600.00 for my speakers.  Bass tightened up a lot and the bass was already tight and the mid bass is much better.  Unless you have actually used those footers, your statement has a lot of holes in it. 

I agree that DSP is the most effective and comprehensive way to properly address room acoustics these days if one is up for it as opposed to pot shot point solutions of the past like these. Dinosaurs!