i was reading the manual for the wyred 4 sound unit and it states this:
A loop in/out feature is also on hand with the STI-v2 integrated amplifiers. In the setup menu, you can select the loopfeature to insert a digital crossover or similar devices into the audio path. When the loop feature is activated, Input 5becomes loop in, and the AUX out becomes loop out.
When the Loop out feature is used, Aux out becomes the loop out which will feed the connected components input,and Input 5 will become the loop in which will come from the output of the connected component. Please note: theloop in connectors are directly connected to the internal amplifiers as if the unit was a standalone amp with 27db ofgain. The loop out is controlled by the volume control, but the loop in is not. Make sure you have all connectionsmade properly to ensure no damage is made to your equipment
thought this meant that aux out and input 5 essentially become the pre out and main in ?
A loop in/out feature is also on hand with the STI-v2 integrated amplifiers. In the setup menu, you can select the loopfeature to insert a digital crossover or similar devices into the audio path. When the loop feature is activated, Input 5becomes loop in, and the AUX out becomes loop out.
When the Loop out feature is used, Aux out becomes the loop out which will feed the connected components input,and Input 5 will become the loop in which will come from the output of the connected component. Please note: theloop in connectors are directly connected to the internal amplifiers as if the unit was a standalone amp with 27db ofgain. The loop out is controlled by the volume control, but the loop in is not. Make sure you have all connectionsmade properly to ensure no damage is made to your equipment
thought this meant that aux out and input 5 essentially become the pre out and main in ?