2. amps-preamps
  3. 168140-16768

Total System Gain Question

I am considering an amp with 25dB of gain and 575mV input sensitivity for rated minimum output, and considering a preamp with 18dB of gain. So total system gain would be 43dB. My speakers are 88dB efficient.

Is too much gain for a 2V line level DAC source? I don’t know what the input sensitivity of the preamp is. I worry I’ll be stuck in the bottom (non-linear) portion of the volume pot due to the total gain ...

I don’t have a feel for this since I’d been using an integrated amp forever.
greg7
russ69's avatar
russ69
3,573 posts
 
"...there is a lot of misinformation in this thread how can you calculate power amplifier output..."

Amplifier power measurement has to include the frequency, the load, and the distortion level to have any meaning. It's a moving target, you just can't pick one number and say you have determined the power output of an amp. 
deer_creek_audio's avatar
deer_creek_audio
70 posts
 
Here’s a link to an app note that overviews the basics of audio system gain structure. Its focus is somewhat around miniDSP, but the concepts definitely apply to analog systems with multiple gain stages. Check it out!

https://www.minidsp.com/applications/dsp-basics/gain-structure-101


charles1dad's avatar
charles1dad
10,250 posts
 
@cleeds is correct in that you can’t determine/calculate the amplifier output power (Watts) based on the information provided by the OP.
Cha
More to discover