2. analog
  3. 169887-136649

Possibly Dumb Question re:Battery as a power supply

I have bought a new Clearaudio Performance DC Wood turntable.  I plan to drive to the dealer in Atlanta and pick it up next Wednesday.  I have seen the wall wart power supply which comes with the TT, and it is not a pretty sight.  Clearaudio sells an upgraded 12V battery and charger supply for "only" $1,200.00.  I don't wish to present myself as a parsimonious individual,  but $1,200.00 seems a bit steep to me.  I am wondering what problems would ensue if I bought a moderately sized (say 25 or 30 lbs.) , sealed, lead acid, 12V rechargeable battery; attached the proper wires to connect to the TT, and used it as a power supply.  When the battery runs down I could just take it to my workshop and use my electronic, automatic battery charger I use to recharge car, truck and tractor batteries to bring it back to full power.  As little current as the TT uses this shouldn't be too frequent a chore.  It is just a possibility, but if it is feasible I might try it.  I would really appreciate any and all comments, criticism or warnings.
kingharold
kingharold OP
304 posts
 
Thanks for the responses.  I hadn't considered that a fully charged 12V battery can provide 13.5 volts.  Perhaps a bit more research is needed.  I sure wouldn't want to mess up my first new turntable since I bought my VPI HW19 thirty or so years ago.Does anyone have opinions about TeddyPardo linear power supplies? That is another possibility
sns
3,003 posts
 
TeddyPardo has good rep. Clearaudio 12v ps only supplies 1.4amps, pretty minimal, that's crazy price for 12v 1.4a lps.
jond's avatar
jond
5,694 posts
 
Lots of folks making good aftermarket linear power supplies that cost much less than $1200 Sbooster is another brand to consider.
ebm
9,311 posts
 
Use the battery power supply sold by the company $1200.00 is not much if you can get a break on the price that's even better.Enjoy!!
ghdprentice
6,514 posts
 
I would also only use the power supply sold by the company. They would have put a significant effort into making sure it sounds good and perform well. Unless, you are and electrical engineer and reverse engineer it… or actually, I have known many scores of electrical engineers… I would definitely not believe anything they say… unless they worked for the company. Good audio is all about nuance, I wouldn’t take a chance… unless you want to buy and test a bunch of them. 
More to discover