I'm a Dummy, Tell Me About Turntable Mats

You can always remove adhesive from the materials used for platters. Lacquer thinner will take it right off. The way the record is clamped to the turntable is more important than the mat. The mat should be firm, have a depression for the label and be 113/4 " in diameter, just under that of the record so that the records lip hangs over. There are two decent ways to clamp the record down. The first is reflex clamping. A thin washer is placed over the spindle and the camp only contacts the record at the rim of the label. This flexes the record into the mat. The best example is the Sota reflex clamp. SME and Kuzma tables come with reflex clamps. The second is vacuum clamping which requires a turntable design for it. With reflex clamping you do not need a rim or ring clamp. Ring clamps do not work well and are bulky and difficult to use. I have seen records and turntables damaged by them. They are also additional mass on the bearing. They will not work with any end of record auto lift that I know of.

MC very graciously nailed it. They all DO sound different plus other considerations like static buildup (felt.)
Start with one of these:
Acrylic Turntable Mat - Black - LP Slipmat with Record Label Recess https://www.amazon.com/dp/B0727PT125/ref=cm_sw_r_apan_glt_fabc_J790KRJNDH1AJXQNW014
Free returns if it doesn’t do it for ya.
Then you can decide if you wanna chance almost 2.5 times the cost on:
https://www.originlive.com/shop/upgrade-platter-mat.html
Happy listening to you.

Adhesive is a non issue with proper solvents. Methyl ketone in lacquer thinner should be a last resort. It will remove a lot more than just adhesive. Plastic, polished finishes, living cells, etc.
As Zappa said "coocoorotya."

as I understand it, you put them on with adhesive.

Some do, some don't. One of my favorites, the pad made by Oracle, uses an adhesive.


The function of the mat is to control resonance generated in the vinyl by the act of the cartridge tracking. If you can hear the cartridge tracking the vinyl with the volume all the way down, that's a bad sign, and also a way to let you know how effective your mat really is. The mat should also therefore be able to damp the platter as well.


If the mat is too hard or too soft, it will introduce a coloration. The correct durometer is that of the vinyl itself. This is why felt and metals both do not work right, although felt is often used because it can act like a clutch during DJ work.

Think about it, even felt was used on my Victor Victoria V from 1906! 

Depends on the table.  I haven't used a mat sine the AR table days.  Been using a VPI table since the early 90's with no mat.  That said, record clamps or weights need to be used if no mat.  

At least that's what works for me.