2. speakers
  3. 170511-3470

REMINDER: tighten up your loose screws

REMINDER, tighten up all loose screws around the drivers. Just Do It. All of them.
Sit back and enjoy your “new system”.

85% of screws on my speakers needed 1/8 to pass 1/4 turn to snug firmly and guess this… all screws on my woofers needed 1 full turn. Some was actually needed 2 turns. Anyways, improvement was a jaw dropping.
Credit reminder to Rick from High Fidelity Cables
128x128nasaman
tablejockey
3,913 posts
 
nasaman,

You may want to compliment your new brass screws with more brass 

https://www.mapleshadestore.com/


jl35
4,002 posts
 
Mapleshade has a great page of about 50 Free Upgrades...they've always recommended brass screws, and no, they don't sell them...
drjim21
11 posts
 
Sadly, it appears to be impractical to to tighten my screws any further - at least the spousal unit claims:

 "The tighter he gets, the looser he becomes..."

Sigh...
surfmuz
400 posts
 
Long time ago when i used to have speakers with back panel attached with the screws I didn’t go crazy screw them extra tight, I just used nail polish to put them on. Nail polish is easy to unscrew if you need it and at the same time it holds screws on the place tightly.. don’t use glue as it will be permanent. 
arch2
308 posts
 
Nice trick surfmuz. I had thought of using the blue thread lock before but that sounds like a good idea. I’ll use the thread lock for my fingernails instead.
More to discover