2. digital
  3. 172706-13640

Considering the Pro-ject Box CD RS2 Transport ? You might want to read this, first.

I recently bought one of these and soon returned it.

In terms of SQ, it clearly outperformed my Simaudio 260DT so I've no complaints in that regard. 

However, I could not get used to its toy-like dimensions.

It would not stay stationary, due to its light weight, so I had to hold it in place with one hand while operating its tiny buttons and loading/unloading discs with the other. 

Needless to say, this issue was only exacerbated once I placed it atop my preferred footers.

While audiophile geishas may find it ideally-sized, I found it highly impractical.

Given that our only current choices for this new drive are the Pro-ject and the 28K Gryphon, it would seem there's an empty niche in the market for a reasonably affordable alternative, housed in a full-sized case. 

To be fair, Steve Guttenberg did grumble a little about ergonomics but on the whole, reviewers' attention has been fixed squarely upon the Pro-ject's undeniable virtues.  

I'm not suggesting everyone will experience what I've experienced nor am I attempting to dissuade anyone from buying this unit- my aim here is simply to shine a light on what's been, so far at least, largely absent from discussions I've encountered. 

 

 

 

stuartk
pedroeb
493 posts
 

It seems like it might be hard to beat for the price.

Can the feet be replaced with something heavier to increase stability?

Maybe a heavy plate could be placed between the unit and the feet with longer screws.
 

nonoise's avatar
nonoise
10,639 posts
 

The top and bottom of the Oreas act like suction cups to whatever they sit on and hold above. I found that out trying them in various places on my gear and it was a PITA to unstick them with one hand while holding up over 40 lbs with the other so I can see them holding the Pro-Ject firmly in place (when affixing them to the bottom and avoiding the units feet). Some minor movement may result but it shouldn’t make it a deal killer as papadog pointed out.

Lots of things to consider.

All the best,
Nonoise

dynamiclinearity
239 posts
 

I agree it's poor design. But a good solution is a heavy weight such as the old VPI brick which will also reduce cabinet induced microphonics.

charles1dad's avatar
charles1dad
10,238 posts
 

@dynamiclinearity 

"I agree it’s poor design. But a good solution is a heavy weight such as the old VPI brick which will also reduce cabinet induced microphonics"

Just curious, have you listened to this transport? One point of agreement by posters on this thread is the "excellent " sound quality. What induced cabinet microphonics? The chassis is solid aluminum and properly damped. A VPI brick would very likely over damp and be counter productive. I believe this would diminished the fabulous transparency it provides.

Charles

curiousjim's avatar
curiousjim
4,250 posts
 

Thank you for the review. My old Sony is starting to get flaky and I was looking at the Pro-Ject as a possible replacement. Now to find a replacement.

All the best.

JD

More to discover