Musetec (LKS) MH-DA005 DAC


Some history: I was the OP on a four year old thread about the Chinese LKS MH-DA004 DAC. It achieved an underground buzz. The open architecture of its predecessor MH-DA003 made it the object of a lot of user mods, usually to its analog section, rolling op amps or replacing with discrete. The MH-DA004 with its new ESS chips and JFET analog section was called better then the modified older units. It has two ES9038pro DAC chips deliberately run warm, massive power supply, powered Amanero USB board, JFET section, 3 Crystek femtosecond clocks, Mundorf caps, Cardas connectors, etc., for about $1500. For this vinyl guy any reservation about ESS chips was resolved by the LKS implimentaion, but their revelation of detail was preserved, something that a listener to classic music especially appreciated. I made a list of DACs (many far more expensive) it was compared favorably to in forums. Modifications continued, now to clocks and caps. Components built to a price can be improved by costlier parts and the modifiers wrote glowingly of the SQ they achieved.

Meanwhile, during the 4 years after release of the MH-DA004, LKS (now Musetec) worked on the new MH-DA005 design, also with a pair of ES9038pro chips. This time he used more of the best components available. One torroidal transformer has silver plated copper. Also banks of super capacitors that act like batteries, solid silver hookup wire, 4 femtoclocks each costing multiples of the Crysteks, a revised Amanero board, more of the best European caps and a new partitioned case. I can't say cost NO object, but costs well beyond. A higher price, of course. Details at http://www.mu-sound.com/DA005-detail.html

The question, surely, is: How does it sound? I'm only going to answer indirectly for the moment. I thought that the MH-DA004 was to be my last DAC, or at least for a very long time. I was persuaded to part with my $$ by research, and by satisfaction with the MH-DA004. Frankly, I have been overwhelmed by the improvement; just didn't think it was possible. Fluidity, clarity, bass extension. A post to another board summed it up better than I can after listening to piano trios: "I have probably attended hundreds of classical concerts (both orchestral and chamber) in my life. I know what live sounds like in a good and bad seat and in a good and mediocre hall. All I can say is HOLY CRAP, this sounds like the real thing from a good seat in a good hall. Not an approximation of reality, but reality."

melm

@ja_kub_sz  Cd rips don't sound any better than streams on my setup. Optimizing network makes all the difference with streams.

 

I'm also agnostic about his res vs 16/44. I'm continually amazed by how much more information extracted with  system upgrades, thought I was at limit of 16/44 years ago. Still waiting to hear 16/44 resolving limit.

 

I2S vs usb, until someone actually uses I2S with 005, only speculation. I have capability of running I2S, no motivation since 005 with usb so good. Whatever, its just a matter of tradeoffs, external vs internal I2S conversion.

 

Melm, thanks for correcting me on handshake, brain fade.

@sns any tips on optimization of the network? I have a cat-8 Ethernet to my Innuos MK3, but otherwise that's it, nothing fancy.

If you did run I2S, how would you do it?

I’m tempted to try the Gaia since some reviews claim a sound jump when used with the Innuos Statement and I2S.

Fiber conversion post server is certainly up there in effectiveness. Other galvanic isolation devices such as Uptone etherregen, Network Acoustics Neo filter, many others. I'm about to try the Neo. Always use linear power supplies with any network devices, cool thing about Neo is no power cord needed, passive device. My experience and many others has been network optimization post server most important.

 

I have Singxer SU-6, hdmi cable goes into 005. SU-6 has configurable pin outs on hdmi as there is no standard for hdmi inputs on dacs.

 

Who knows when it comes to clocks, lots of differing opinions, I'm still gathering information on this since bad experience with clock.  I'd upgrade usb feed with renderers before I'd mess with added clocks. Devices like SOTM SMS200, Uptone USB regen, many others. USB is easily most optimized input with 005, wonderful sound quality all of getting with usb testament to it's quality.

 

My take on most effective optimized feed from server to 005 would be server>FMC(fiber) > usb renderer(many choices) >005. This would be fundamentals of great streaming feed, everything else icing on cake.

 

 

Icing on the cake for me would be if the 005 had a Fibre input for streaming and was ROON READY. Call it the 006.