Musetec (LKS) MH-DA005 DAC


Some history: I was the OP on a four year old thread about the Chinese LKS MH-DA004 DAC. It achieved an underground buzz. The open architecture of its predecessor MH-DA003 made it the object of a lot of user mods, usually to its analog section, rolling op amps or replacing with discrete. The MH-DA004 with its new ESS chips and JFET analog section was called better then the modified older units. It has two ES9038pro DAC chips deliberately run warm, massive power supply, powered Amanero USB board, JFET section, 3 Crystek femtosecond clocks, Mundorf caps, Cardas connectors, etc., for about $1500. For this vinyl guy any reservation about ESS chips was resolved by the LKS implimentaion, but their revelation of detail was preserved, something that a listener to classic music especially appreciated. I made a list of DACs (many far more expensive) it was compared favorably to in forums. Modifications continued, now to clocks and caps. Components built to a price can be improved by costlier parts and the modifiers wrote glowingly of the SQ they achieved.

Meanwhile, during the 4 years after release of the MH-DA004, LKS (now Musetec) worked on the new MH-DA005 design, also with a pair of ES9038pro chips. This time he used more of the best components available. One torroidal transformer has silver plated copper. Also banks of super capacitors that act like batteries, solid silver hookup wire, 4 femtoclocks each costing multiples of the Crysteks, a revised Amanero board, more of the best European caps and a new partitioned case. I can't say cost NO object, but costs well beyond. A higher price, of course. Details at http://www.mu-sound.com/DA005-detail.html

The question, surely, is: How does it sound? I'm only going to answer indirectly for the moment. I thought that the MH-DA004 was to be my last DAC, or at least for a very long time. I was persuaded to part with my $$ by research, and by satisfaction with the MH-DA004. Frankly, I have been overwhelmed by the improvement; just didn't think it was possible. Fluidity, clarity, bass extension. A post to another board summed it up better than I can after listening to piano trios: "I have probably attended hundreds of classical concerts (both orchestral and chamber) in my life. I know what live sounds like in a good and bad seat and in a good and mediocre hall. All I can say is HOLY CRAP, this sounds like the real thing from a good seat in a good hall. Not an approximation of reality, but reality."

melm

Update on mine, not much to tell. I listened for a little bit but my main speakers are out of the system because I am burning in a pair of Polk R600s for my son. I have about 120 hours on mine. I had some Pink Floyd on, It sounds very detailed, even at the lower volumes I was listening at (tinnitus is bothering me). I don’t notice exceptional staging capabilities others have reported yet, but I am with unfamiliar speakers too, and I haven’t messed with optimal placement yet with those either.

I have a photo of the 005 in the system on my virtual systems page.  Last pic at the bottom.  IMO, photos do not do it justice.  

Too many speaker variables for you to evaluate certain capabilities of the DAC. I admire your patience though. I would have put my speakers back in by now ;)

@kclone The online manual recommends you set DPLL to BW01 for PCM and BWO6 for DSD. I have found the SLOW filter is best.

Turn off DOP and DE-Emphasis unless you really need them.

You have an integrated amp so use the pre-amp and set the 005 volume to fixed.

Make sure your Aurender is outputting Pro Level SPDIF and your conversion settings are correct.

Happy Listening.

I was on the phone with Midwestern Audio and I thought he had me set it to fast filter.  Unless I heard him wrong which is possible.  

Well, I tried to hook up a component to the Equi-Core and turned it on and the breaker associated with a couple outlets tripped and turned off all the power, tv, power, amp, lights and all.  sorry for taking up the thread for this, but there was never a problem until I initially tried to plug the 005 into it.  I flipped the breaker back on and everything works fine with power strip and outlets, but no way am I plugging anything into the Equi-Core again.