2. speakers
  3. 176608-106445

First impressions of the Isoacoustic Gaia 1’s

On my KEF Reference 5’s.

While I normally hear little to no change with “Tweaks”, I installed them Saturday evening and found immediate spatial differences. Just about every album sounded more open. I told my wife, who helped me install the Gaia’s,  that if I wasn’t wowed, I’d send them back.

The room has wall to wall carpet and pad on the floor and when  I first received the Reference 5’s, they sounded flat. I put small hardwood flooring samples under them and it helped a little.  I then put a small slab of granite under each of them and they became much nicer to listen to. I was quite surprised at the change. 
The Gaia 1’s are sitting on the granite as well and so far, I’m very happy. 

It’s only been a few days, but I’m pretty sure they are “hear” to stay.

Anyone else have similar experience’s with speaker. Isolation?

JD

128x128curiousjim
uncledemp
779 posts
 

I’ve been using springs like the Nobsound. Once I adjusted the number of springs to allow for about 1/2 compression, world of difference. 
 

So good I ordered a pair of Townshend Podiums today. I appreciate all the expertise on this site, your positive experiences made it a risk worth taking. 
 

**** Question for podium owners. I have standmounts on heavy stands. How would you place the stand-mounts on the stands, just blu tack?

 

Thanks-

fleschler
2,021 posts
 

@phillyb   I MUST use my Townshend Sink under my VPI TNT VI turntable.  It has inadequate/ineffective footers, much worse than the spring and rubber feet of my earlier VPI 19-4.  I also require Ultra SS Stillpoints under my preamp/phono stage which has a cheap metal base.   I use carpet piercing spikes that came with my 180lb speakers which go into a 12" 3000 psi steel reinforced slab.  I use 1/2" granite slabs under other electronics as I prefer the sound of the equipment as intended by the developers.   I'm not certain about my Bryston Bit20 iso trans 95lbs so I put the same Stillpoints under it as well.  

whitestix
720 posts
 

I have found no efficacy with footers under components, but I am a major fan of GIAIA footers under my speakers.  Best tweak ever that I have tried and I have tried a lot of them.  Townshend isolation devices might be more efficacious, but they are far more expensive. 

jafant's avatar
jafant
19,829 posts
 

bdp24

 

Thank You for the follow up to my query.

 

Happy Listening!

ronboco
854 posts
 

Help educate me please. Wouldn’t the pistonic movement of the drivers make the whole speaker move back and forth on the podiums? And this in turn would alter the performance and sound of the speaker ? 
 

Ron 

More to discover