How far is your SUT from your Phono Pre/Preamp?


Had to go back to the internal SUT in my phono pre today because it needs to be at least 3 feet away from the preamp or phono pre to prevent hum. Is this normal? I don't really have the 3 feet available.

dhcod

All good advice here.

In addition to Raul's comments you might also try a different orientation of the SUT.

You don’t happen to have the SUT plugged into a different electrical outlet? 

I've spent the morning doing a bunch of things, reorienting, finding weird angles, and changing cables to shielded cables. Cables make no difference at all. There's definitely one spot that I found to place the SUT that is the quietest and it's about 14 inches away which is good... but there's still a noticeable hum, although only within 3 feet of the speakers, not in the listening position.

My question now is whether the hum is the fault of the SUT or the phono preamp? Will any SUT that gets near my phono preamp cause a problem? Probably need another SUT to figure that out.

Is the SUT or the phono stage in close proximity to your amplifier? Could the power transformer in the amp be the cause? Just thinking out loud....

 

 

@atmasphere  : this comes from my post: " ( an even of the SUT it self. You can rotate it for example.  ).

 

R.