Does a DAC need a large/strong power supply?

I assumed we were talking about long term comparisons in one's own system. Quick A/B comparison in audio showrooms won't tell much. Don't want to go in depth on this, but I recall doing the quick A/B comparisons back in the day. Nearly every audio showroom had multiple components on display, all connected to switch board. Salesmen would do the old switcheroo on you, these guys were real magicians in fooling you into preferring most expensive components. This was good learning experience for a couple of budding audiophiles. Ever since then proponents of blind testing regime have caused a chuckle.

I understand this is your experience. I “very “ respectfully disagree.
Charles

I think that depends on what we are measuring.
For instance steady state tones will not show any filter ringing behaviour. But they should show noise and harmonic distortion. (Both of which should be low anyhow.)

By ‘overkill’ I guess you mean excellent power supply, possibly in a seperate box .  I believe power supply is a fundamental aspect in our hobby , so my answer is yes, final answer 

Audio lovers need to realize that a DAC is not just a digital to analog converter.  It also must amplify the analog signal to a reference output voltage making it useable to the preamp, integrated amp or power amp in some cases.  

The analog amplification circuitry is typically very minimal in inexpensive DACs. This is where the opportunity is to greatly improve the sound quality.  The best DACs and CD players for example pay much more attention to the analog amplification section circuitry.  This is where the large power supply enters the picture (the best use low noise r-core transformers, e.g. Luxman) in addition to filtering and storage capacitor banks.  Look under the hood ! 

How does a great analog section affect the sound? Superior low noise performance and a lively, exciting micro and macro dynamic sound with lots of energy. 

The sound of basic DACs is underwhelming by comparison. 

Get one and you will know what I mean.   

@avanti1960

The analog amplification circuitry is typically very minimal in inexpensive DACs. This is where the opportunity is to greatly improve the sound quality. The best DACs and CD players for example pay much more attention to the analog amplification section circuitry. This is where the large power supply enters the picture (the best use low noise r-core transformers, e.g. Luxman) in addition to filtering and storage capacitor banks. Look under the hood !

Spot on! Factual and well stated. High quality power supply and analog sections are critical and what separates the wheat from the chaff with regard to the sound quality of the DAC.

This in my opinion is very obvious if one were to actually listen and compare. Despite their impressive test bench measurements, the inexpensive DACs just don’t offer the same high quality of sound. Corners are being cut to maintain the cheaper price point. A price is paid for the significant compromise.Again, just listen.

Charles