Stylus skipping at beginning of record

Don’t be embarrassed. My friend Has an OL arm. I helped him set it up and I must say it is a royal PITA! This is from another forum discussion about that arm!

If you are tracking within the recommended range, you are not too light.  Do not exceed the recommended tracking force. The recommended tracking force is not only intended to minimize wear and damage to the stylus, cantilever, and suspension of the cartridge, it should minimize issues with record wear.  The recommended downforce puts the signal generating elements of the cartridge in their proper orientation when the record is being played--to high a force pushes the generating element out of its proper location and this will adversely affect the sound.  Do not adopt a "cure" for one problem that causes another.

Recommended is 2g.  I’m at about 1.9  

yogiboy,

Thanks for  the sympathetic post.

 It really is a PITA!

I use AudioTechnica N145 cartridge that tracks at 1.25...1.50g. My cue lever is slow enough to land PERFECTLY without jumping even on records that have thicker lip. That's on my Thorens TD125. On my VPI turntable I prefer to land needle first then turn on motor. It picks up speed almost as fast as DD turntable.