Perception and Watts: Doubling of power

Good question!

I haven’t a clue…Ive also turned down and up the volume to what I figured was halved or doubled at output but I’ve never measured the decibel levels during.

Another excuse to play with one of my frivolous measurement devices!

I bought a SPL (sound) meter.

I have recently been playing with speaker cables on my tube amp system (PM EVO 400 pre and power feeding Klipsch Cornwall 4's) and have found that the choice of speaker wire gauge has large effects on perceived volume and "control." There is nothing new here,of course, but it is fun to experiment with the so called "Western Electric" multi-stranded tinned copper wire. From 16 gauge to 10 gauge there is room for lots of slants on the sound emerging from the speakers. Since the Cornwalls are bi-wireable there is also room to play with mixing wire gauges between the bass taps and the treble taps too.

Have also been experimenting with ziploc baggies filled with powdered Rochelle salt wrapped around speaker cables. This is based on a comment Caelin Gabriel of Shunyata once made about these salts being good at attenuating ambient electromagnetic noise,

Usually an increase by 3db is doubling the spl , so raising by 10 db is kinda triple the spl and Watts is what you feed the speaker depending on sensitivity of the speaker. But you all know this by now 😁

A 10db increase in SPL is typically perceived as "twice as loud". This usually requires a 10X increase of amplifier watts. So an 80 watt amp can have a SPL 10db higher before clipping than an 8 watt 300B SE amp.