Beryllium Tweeters


I've only heard Paradigms Beryllium Tweeters but I absolutely loved them! What other "affordable" (>$2k new or used) speakers use them and what are your experiences with Beryllium tweeters? What other Tweeters rival the extension, air and sweetness that I was hearing with my Paradigm Sig 2's? DeCappo? Usher? ...?
128x128b_limo
01-10-15: Johnk
92db is not high efficiency
Yes, that's true John. But a speaker's sensitivity is only part of the story. John Atkinson provided this neat summation in his Stereophile review of the original De Capo's -

"The MM de Capo i's voltage sensitivity was above average, at an estimated 91dB(B)/2.83V/m, which is slightly but inconsequentially less than specified. Its impedance (fig.1) was reasonably benign, dropping below 6 ohms only in the lower midrange and the high treble. (The speaker is thus both sensitive and efficient.) The minimum value was 5.1 ohms at 10kHz, and the electrical phase angle was generally mild."
01-09-15: Runnin
Speaker cable matters a lot at this level of quality, as do interconnects. I got all solid core, and it is much nicer/cleaner than fine strand. The difference here to my speaker cables was immediate and not subtle. It wasn't that I could tell that something was wrong and went on a cable search. I just experimented and discovered how good solid core is.

Same with interconnects. I ended up with solid core copper plated with silver by Morrow Audio. I can recommend without reservation. Imaging like crazy and a 3D soundstage I never knew my music had. My cables are MA3, and the speaker cable is Audioquest Type 4.
I also owned a full loom of solid core cables (Acoustic Revive) which use extremely pure oval-shaped copper conductors instead of plated copper. Using solid core conductors is one way to address skin effect amongst other design challenges, but there are other solutions which have equal merit.

I currently use Jorma Prime & Statement cables which use many extremely thin and extremely pure copper conductors wound exactly in parallel with ceramic glass fibres around a ceramic glass fibre core to form a tube, together with other natural materials like walnut. Jorma experimented with many other materials as well as copper alloys, but found copper delivers the most neutral, transparent, and natural musical signal.

Mind you what what Jorma or I might find sounds good may not be your cup of tea or suit your system. That's why there are a million cables out there to choose from!
01-10-15: Johnk
92db is not high efficiency

Depends on how you define it, but for most anything above 90db is easy to drive. If you are talking about bizarre Omegas and strange speakers that are 100-110 db and thrive on little teeny 3 watt flea amps then yes, 92db is not high efficiency. But for most normal people 92db is.
Acurus “Hofman’s Iron Law” and it offers you any two of the following: small cabinet size, deep bass and high sensitivity. No Omegas exist as you discribe and your idea that it depends how you define it is very wrong. Also would seem you feel that only adnormal people understand loudspeakers and with that I slightly agree.Normal people don't need science or physics interfering with what they feel is right.