Quick Luxman R-117 question

Quick answer:

Speaker A & Speaker B outputs are identical as far as specs/load are concerned.😊

The terminals are in parallel, so there is no difference.  The issue is that they probably expect a minimum 4 Ohm load, so that means if you use both at the same time they should be rated at 8 Ohms.

@imhififan @erik_squires Thank you for the responses - I am having relay problems/cutout on channel A, so am going to try B outputs, and was wondering if there is any difference - thanks again!

Hmm they are likely in series with a jumper so you are probably going to see the same issue. Good luck though, love that older Luxman stuff!