The terminals are in parallel, so there is no difference. The issue is that they probably expect a minimum 4 Ohm load, so that means if you use both at the same time they should be rated at 8 Ohms.
Quick Luxman R-117 question
Owners or non-owners - does anyone know if the Speaker A & Speaker B outputs are identical as far as specs/load are concerned. I don't know if it's common for A & B outputs to have different specs. Tried looking around but could not find or understand the information I need. Thank you.
- ...
- 8 posts total
@imhififan @erik_squires Thank you for the responses - I am having relay problems/cutout on channel A, so am going to try B outputs, and was wondering if there is any difference - thanks again! |
@mofojo Ah crud, well i'll give it a try, then look at cleaning or @erik_squires replacing them, if that's easy enough. Thanks for the help! Putting the volume slightly above 25% seems to override any problem, but that's just a tad too loud unless I'm really vibing. Volume knob was wonky when I got it, so could be related to that. And yeah @mofojo it's an absolute pleasure sound-wise, this issue aside!
|
- 8 posts total