Cost Incurred to Achieve a Vinyl LP Replay


As a Long Term user of the Vinyl LP as a Source, as well as being one who has ventured into discovering and experiencing how fellow enthusiasts have developed their own interest in Vinyl replays. I have got to a place where limited to my experiences only, most I have encountered have over many years have been constrained in their budgets for the Ancillaries required to replay a Vinyl LP.

A few have exceeded the approx' £30K mark for a TT > Tonearm > Cartridge, and fewer from this selection are using dedicated Electronics with a Value of more than £10K to support the Source. 

My most typical experiences are of Ancillaries and Electronics used to support a Vinyl Replay with a combined cost of between approx' £6K - 16K.

I have been demo'd through being at commercial events, Ancillaries and Electronics that far exceed the above Values, but as these demo's are not from a familiar system and have been quite some time in the past these experiences have not been considered as being of importance or contributing to shaping how my present methods are I place to replay a Vinyl LP. 

What I have also become quite aware of, as a result of sharing and receiving accounts of Past Experiences, is that 'dye in the wool' Vinyl Replay Enthusiasts have been active at different levels in their trying out or introducing new ancillaries to get to a place where they are believing that most contentment can be found for their own unique preferences for a produced sonic.

My own endeavours has been to remain with a Particular ancillary and look to have it overhauled, where a modern approach is used to produce a end product that has materials and electronics selected and utilised to transform the ancillary into something that is noticeably different for the better over the original. As such methods are Bespoke, it is difficult to have the methods understood by a onlooker.

My experiences shared have introduced myself to like minded individuals in the flesh and through Global Forum communications. 

I do belive adopted methods to produce Bespoke ancillaries are capable of producing performance that will be more aligned to ancillaries costing much more if using a Branded Item is the guideline, as a selection of materials and adopted methods for these materials can be found in the more recent marketed products. . 

For myself Vinyl Replay is a method to supply a form of entertainment The use of ancillaries to create this entertainment is a must. The learning that is to be attained as a result of using the Ancillaries creates what is more aligned with being a hobby.

The question that is a vaguery, is how much monies, from a range of approx', £3K ($3.2K) - (£350K ($400K) does one feel justified in spending/believes needs to be spent, to satisfy their hobby (lessons learned) needs and need to be entertained (enjoyment of listening to music) .

It is without doubt, there will be 

 fewer reading this, that will be experienced with and able to comment on the 50K and upward ancillaries, it would be good to see what is to be shared. 

 

128x128pindac

At the risk of being obvious or even oblivious.....

@pindac , what do you feel comfortable spending to achieve what you think that you're expecting to accomplish?  When the 'spread' of available means and that which accompany the various strata of performance v. co$t  can and does range from a nice bicycle to a Really Nice MBenz or Beemer...

33 and a third to 33.33334?  A tone arm and cart that doesn't raise vinyl curls from the grooves to that which wouldn't raise an eyebrow if it landed on it?  

An 'ok' cable with gold-plated connectors to that which rivals NASA orbital specs?

I'm kinda doomed to pref'ing 'sea level' stuff since I honestly can't hear butterfly wing motions...but that doesn't mean I don't or can't accept there are those than can....or will swear in a court of law or at me that they Can.

To cut to The Chase:

Don't take our a 2nd mortgage on the house you don't own.

Just....be happy...esp. in the New Year.  *clink*  Cheers, J

....truth be told....If our OP has 50K $/EU/Yen/cupcakes to expend, it's into that which I can't ascend to on a number of levels...and that's OK, with self and ought to be for the assembly here....but esoterica wanders into the Broad Fields of Unmown Growth, the Tall Corn which some disappear into, recognized only by the bleating of Profound Pleasures unknown to many....

"I cannot hear what you're hearing through this screen or my keyboard...So?...."

Not trying to be rude, but...

Bottom line, spend what you feel comfortable spending, but without sacrificing your retirement funds and plans !  Audio is a negative ROI financially... so only discretionary funds should be used to support this hobby. 

To be fair, I doubt english is the OP's first language. But the post is confused as it mainly rambles on about this:

"I do belive adopted methods to produce Bespoke ancillaries are capable of producing performance that will be more aligned to ancillaries costing much more if using a Branded Item is the guideline, as a selection of materials and adopted methods for these materials can be found in the more recent marketed products."

This seems to be something about tweaking versus off the peg solutions from established manufacturers.

Then the closing question seems to be about the question of how much money does one have to spend to get top quality sound from vinyl?

The latter is a how long is a piece of string question that starts with a Rega and ends up with a Dohmann, SAT, Techdas etc. and all points in between. (My own vinyl replay system is in my profile).