Eliminated my preamp with amazing results


I pulled my preamp out completely. The result's were not subtle. 

For those who stream music only... I was going from my laptop... to my DAC...to my preamp...to my amp. My preamps ONLY function was volume control. Source control not needed.

I started using Audirvana recently which comes with it's own high quality 64 bit volume control that was far better than the potentiometer in my preamp. It dawned on me that I could control volume using Audirvana and plug my DAC directly into the amp and bypass the preamp altogether. (Roon and Jriver also have excellent volume controllers) Note: Audirvana has an app download on a tablet/phone so it acts like a remote control. I'm loving it!

This not only eliminated the preamps volume control but it took out ALL the electronics associated in a preamp including some cables. A FAR more direct route. However, you must use caution and make sure the volume is controlled properly in the software since the amp will be fed wide open volume.

Having experimented with 'passive' preamps in the past (McCormack TLC-1) I thought the sound would possibly lose dynamics and bass response would suffer. WRONG!

The results were...Shocking!! Immediately the extended depth of the image was noticeably deeper. Background darker. The highs are the best I've ever heard. Pristine. The bass was dynamic, tight and most of all 'textured' in a way I never heard before. As I stated earlier the results are NOT subtle! 

This is an experiment that took a few minutes to set up and yielded the best performance improvement of ANY other tweak I've ever tried. Not anything like using a passive preamp.

Equipment used...  Peachtree DAC-itx. 

                               Preamps...McCormack TLC-1 and Melos tube preamp.

                               Amp is McCormack DNA 0.5

Understand that different components will have different interactions with each other. Your results may vary. However, IF you don't like it, it takes just a few minutes to put the preamp back in the system. Nothing to lose and lot's to gain. After hearing this, I will NEVER go back to using a preamp. 

Good luck!

 

 

gdaddy1

I’ve tried not using a pre s couple of times. First time with a Topping D70s dac running as a pre while trading a Creek integrated for my current preamp (SPL Elector). It was better -in some ways- than running the Creek as a pre into a power amp. But then got the Elector…no contest. Having a nice pre made everything come alive, open up and pull me into the music in ways I’d never imagined possible in my own system.

But then I got an Okto Research dac 8 stereo which actually had a very nice preamp stage. When I tied that in directly, it kind of closed that gap a bit. In some ways more dynamic and fast, but still not quite as balanced, staged, refined and nuanced as with the pre.

If I had a choice of amps to try, that could also change things. Synergy really goes such a long way!

The absolute best non active setup I have ever heard was an Autoformer volume control (AVC). The best overall setup I have heard was the AVC fed by a Jung Diamond buffer.  The big issue with almost any active or passive pre is the quality of the volume control. So much is lost with the typical potentiometer.

Based on personal experience, I agree with Paul McGowen. Paul originally was a believer in the concept of the best preamp was no preamp at all. A decade ago, he then changed his mind about inserting a preamp in the system. I kept believing that the best preamp with no preamp until about a month ago. I then inserted a preamp between the DAC and the amplifier. What a positive difference it made.  I cannot explain how introducing more circuitry into the signal path improves the sound quality. I’m absolutely clueless on that from a scientific basis.

 

I think you need to keep an open mind and try your system with and without a preamp.  I will never go back to my previous position that no preamp is the best preamp