I'm running a CJ PV9 with the upgraded teflon caps.
Preamp Recommendation for First Watt F4
CJ ET7s2
Aric Mother Load II
Allnic L7000
Thanks
- ...
- 11 posts total
Many folks are reporting excellent results with the Pass B1 with Korg triode. I'm currently building one for my F5 amp and to try with other stereos. I'm adding film coupling caps and an external linear power supply but otherwise stock. If I really like it, I'll add remote control volume later. The first link is for the kit ($299 complete). The second is a lengthy build thread. It would be interesting to see how much better the line stages the OP lists are than this inexpensive kit when built with decent film coupling caps. The stock electrolytics are 10uf. Recommended film values to keep size down are 0.22uF for the first cap in the signal path, 1uF for the second and around 3.3uF for the output. |
@ajant: I would love to be able to hear the F4 with a very nice high gain preamp, and expect it would sound great. I think it would also be enough juice for 80% of my listening. I plan on keeping the F4 indefinitely even though I'm not using it now. If I were looking for a good inexpensive matching preamplifier, I would strongly consider a (used of course) Blue Circle BC 3000. Lots of gain and I liked it very much. I had one couple of decades ago and thought it was much better than the Hovland HP 100 that all the critics were falling over at the time. I sold the Blue Circle to purchase the Hovland and that was my way of truly learning that critics are just other people's opinions and what counts is mine. I would also consider a CAT from Ken Stevens. @vinylvalet : |
- 11 posts total