help! no sound

Hi.

Thanks for your help.

To be more clear- I run an RCA cable from a cd player to an amplifier that connects to my non-powered speakers; from that same cd player I run a bnc out to the Schitt bifrost.  That is the then connected by RCA to the LYR 2.  So since I got these messages I did a few things:

- made sure I selected the right input mode on the DAC. 

-pulled out the tubes and tried it without

-ran rca directly from cd player to Lyr 2.

None of this produced sound through the headphones.  This makes me think that the LYR 2 needs to be repaired.

Anything else to try?

Thanks!

Margot

Sounds like the amp needs to be repaired.

I have a Lyr 3, not a 2, but have you checked that the RCA cable is plugged into the inputs and not the outputs? And I also assume you've checked that the power cable is firmly inserted at the back of the Lyr and the cable is plugged into a live outlet at the other end, and the power switch is on. Sometimes it is easy to miss the basics.

Margot have you selected the proper input on the schiit defrost dac? It must be switched to spdif. And proper inputs on lyr 2? Try switching inputs on it.

If none of the above works it's possible your BNC adapter is bad? At least that would be cheaper outcome.