Sota Sapphire and Isolation?

I own several SOTA and I was just happy listen to the music on a piece of MDF.

get Stethoscope and listen to the machine while running listen to the base top then the platter still and tap on the surface it on.

Great buy the new SOTA quite nice.

Their support is excellent too...   Donna and Christan are great to deal with.  

I have been party to the use of a Stethoscope to assist with identifying a lower noise being present when a Platter Spindle Bearing Modification has been carried out.

Comparing the noise floor between a Unmodified/Modified same model TT has shown substantial differences in noise floor, especially when Unmodified is not with a known service history for the Bearing Assembly.

When checking for the presence of noise related to a Mechanical Operation, my experiences are showing the following:

No Service History - Serviced - Modified, are the order that has shown quite large steps between each other in relation to the perception of noise floor being detected through the Stethoscope.

I have no knowledge of a Stethoscope being used for checking the influence of a Kinetic Energy being transferred and a poor decoupling method being adopted.  

ABSOLUTELY NOT! The Sapphire is an extremely stable turntable. All it needs is a sturdy shelf, nothing more. You will make it very difficult to use if you try placing it on an isolation platform. 

I own a Cosmos now and ran a Sapphire for 40 years. 

While it is impossible for us to know what the complex interactions will be, the odds favor a bad reaction to putting a sprung table on a sprung platform.  Even a slightly compliant platform, like the Ginko platform may be a negative, but, one can only know by trying it.  There are two basic concerns.  Obviously, the resulting sound is very important, but, the other concern is susceptibility to footfall issues.  Sometimes, suspended tables are more susceptible if the sharp impulse from footfall causes the spring suspension to bounce wildly.  This is most often a problem with what I consider lightly sprung tables that move up and down when only light pressure is applied to the plinth or platter (e.g. some JA Michell tables).  More stiffly sprung tables are less susceptible (e.g., the Basis Debut that I own).   The SOTA Sapphire is sort of medium stiffly sprung. If you don't have footfall issues, my bet would be that it will sound best on a very rigid platform which lets the suspension do what it is designed to do.