2. misc-audio
  3. 187927-81174

SnubWay Question Thread

Happy New Year

For those interested - the 1st of three Snubber Products is ready for full scale production - SnubWay works really well with Puron, each doing their job in good order. 

Viet made a tidy little video to explain the product a bit and make a demo - this is from his What’s On The Bench Videos

We tested ParaSnub (aka SnubWay) with a simulated SMPS noise source that has an 1kohm impedance. This is to simulate a typical SMPS transformer impedance between the high frequency generated voltage and the line (mains) that it is connected to. We inject about 5Vpp 400kHz, 100kHz and 60kHz noise using a function generator and get between -30dB to -33dB reduction in noise (about 100mV to 150mVpp). This is a significant amount of noise reduction and can really help clean up the SMPS noise contamination in our power outlet strip. The level of reduction may vary, and will depend on your particular SMPS noise source impedance, your equipment, and your particular house wiring, etc.

A short You Tube Video here
 



Thanks

Mark

verafiaudio@gmail.com
 

verafiaudio
Post removed 
agisthos
506 posts
 

Is there supposed to be a light on the underside of the Snubway like the Mainstream?

And does the Snubway get warm at all?

verafiaudio OP
746 posts
 

@agisthos 

NO illumination of SnubWays base. Main Stream yes, SnubWay no

SnubWay does not run warm. Main Stream a little bit

Thanks - Mark 

agisthos
506 posts
 

Yeah the Snubway was cold to the touch after being plugged in for hours.

So far I have it on the AV system and see/hear improvements. Will get around to the audio system soon!

verafiaudio OP
746 posts
 

@agisthos 

Thanks very much - look forward to your results in your Audio System 

We are processing both SnubWay and Main Stream as quickly as we can in our new space in California - going really well

Best wishes - Mark 

More to discover