Hot off the press...Technics SL 1300G

I own a 1200G. I also have both a SOTA clamp and an HRS weight. I prefer the weight because the clamp imposes stress on the spindle whereas the weight does not. I cannot detect any sonic difference in the use of one over the other. 
 

The arm lift is manual and works very well. 

"I prefer the weight because the clamp imposes stress on the spindle whereas the weight does not. I cannot detect any sonic difference in the use of one over the other."

jmeyers- 

So you can fit a rubber washer, place a LP over that and the clamp has enough spindle to dish the LP flat?

The spindle itself is a solid, machine cylinder made of stainless steel usually. How can it possibly hurt the spindle to pull up on it as with a record clamp? On the other hand a record weight undeniably puts added burden on the bearing and thrust pad. Those are wearable items. Somehow, the reasoning of the foregoing statement (see previous post) eludes me. The whole point of a record clamp is that it improves contact between the record and the mat without adding any appreciable stress to the bearing and thrust pad.

I am a user of Spindle Weights only and have in my set up adopted 1Kg Weight as the most preferred. A later addition of a Composite 1Kg weight proved better for tidying the end sound up than the Homogenous 1Kg weight.    

lewm questioned the "spindle stress" statement better than I could.  I was about to ask in a somewhat less scientific way.