I went to the Parts Connexion and found the same ceramic resistors that Magnepan provides and bought matched pairs 0.1 ohms, 0.2, 0.3 and so on up to 0.8… they are very inexpensive and then find which value gets you the sound you want.
Magnepan LRS+ resistors on the tweeters… which?
I have a pair of LRS+ and after playing with the set-up positioning for a while I have finally found the spot where everything aspect of the sound is right apart from the treble: it is simply too high, and is tiresome after a couple of records.
But Magnepan knows it and fit a pair of sockets to allow the user to play with 10W resistors, ranged from 1 to 2 Ohm.
The resistors that come with the speakers are not the best and some users refer that they affect the sound too much.
So I wonder, what are the best resistors to fit in the LRS+ ?
- ...
- 55 posts total
I think @snapsc has the right idea. Have a range of values to swap in and out. Listen and possibly even measure to get the sound that is most pleasing to you. |
@pureclarity, I have several amps and cables to work with, and I have tried almost every combination. The two that I have used the most are: - Naim Nac 122x / Flatcap 2x / Nap 150x with Naim Nac A5 cables - Vincent SV-237MK with Van Damme L-OFC 4mm cables You are right about the importance of both amps and cables, but I tend to think that the treble presence (too much of it) is a trade mark of Magnepans in general, and they know it to fit a way to reduce it by the use of resistors. What amp are you using and what cables?
|
- 55 posts total